Winter climatic curves v Spring/Autumn climatic curves
We have a Grant Aerona3 and are trying to tweak our cliamtic curves after discovering our installer had set them to just heat the radiators at max and burn holes in our pockets. Should you expect to tweak the curves during the year and thus have different settings in winter compared to spring or autumn or is it OK to keep the same settings all year?
Posted by: @davidm06We have a Grant Aerona3 and are trying to tweak our cliamtic curves after discovering our installer had set them to just heat the radiators at max and burn holes in our pockets. Should you expect to tweak the curves during the year and thus have different settings in winter compared to spring or autumn or is it OK to keep the same settings all year?
Very sensible (you, not your installer).
I suggest (if you haven't already) you set any TRVs to well above the desired temperature and any thermostat ditto, so you get the WC curve to as low as possible. You will hopefully want to leave most there so control is essentially by WC alone. Heat pump on 24*7 I hope.
The theory is that the settings should be the same all year if you get it right at both ends. Of course its difficult to adjust the 'high OAT' end until we get milder weather, so in practice you might have to iterate a bit. Currently its a bit intermediate so you might find you need to tweak the 'low OAT' end again when it gets colder.
4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.
- 26 Forums
- 2,129 Topics
- 46.7 K Posts
- 43 Online
- 5,651 Members
Join Us!
Podcast Picks
Latest Posts
-
Without meaning to sound dismissive, @toodles, I think ...
By Majordennisbloodnok , 36 seconds ago
-
RE: Who's your electricity provider and what's your tariff?
@editor Ok Elon, I have your battery, go on, make me an...
By Toodles , 16 minutes ago
-
RE: Forum updates, announcements & issues
Just to keep everyone in the loop, as the site continue...
By Mars , 17 minutes ago
-
RE: Fast DHW setting on Midea (Clivet) heat pump
@simon-w, is this something you could potentially assis...
By Mars , 11 hours ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Fwiw I called my installer out for the first time a few...
By JamesPa , 16 hours ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@sandy, I'll send Vaillant an email tomorrow and see if...
By Mars , 22 hours ago
-
RE: Long term efficiency degradation
@jamespa yes as I thought thanks. We have a reaso...
By Scalextrix , 1 day ago
-
RE: Who has a V2G EV installation
I agree, but a word of caution. V2X is also sometimes u...
By Majordennisbloodnok , 2 days ago
-
RE: Sunamp Thermino Heat Battery
@jamespa A few days after the installation had been com...
By Toodles , 2 days ago
-
RE: Is your heat pump insured?
My home insurance renewal is due soon meaning I am doin...
By cathodeRay , 4 days ago
-
RE: Planning Permission May 2025
Fair enough. I have read the legislation and MCS020a ...
By JamesPa , 4 days ago
-
RE: How do I choose a single room MVHR to prevent losing heat in my bathroom ?
An update on the Heatsava. It is the most difficult thi...
By heat-pump-newbie , 4 days ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
I've certainly seen that on their Ts & Cs page but ...
By Majordennisbloodnok , 5 days ago
-
RE: ASHP heat output monitoring
@carlo - not much better, is it. It looks more like a u...
By cathodeRay , 5 days ago
-
RE: Renewables & Heat Pumps in the News
this document extensively describes (in a non-blame, ne...
By Judith , 5 days ago
-
RE: Ecodan - Legionella Operation Time and Target Temperature
Once the white plastic cap is removed, my immersion loo...
By Old_Scientist , 6 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@dgclimatecontrol I don't know, but they were not happy...
By DavidAlgarve , 6 days ago
-
RE: Why do we need pressurised systems?
A good question @toodles. My old open thermal store and...
By AllyFish , 6 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
Cross references for @martingale Background discussi...
By Transparent , 7 days ago
-
@ecobaker May I ask a question of you please. I too hav...
By Papahuhu , 7 days ago