Vaillant aroTHERM plus not level or flat - what base is best under an external unit?
Hi. I've had a Vaillant aroTHERM plus installed. The external unit has installed on some existing flagging behind next my house in my garden. The flagging wasn't level, so the installer has used some flint from my garden to raise one side of the unit by a 15mm or so
The installer checked the unit was level using a spirit level (I saw them take a photo of it). But I've since checked with a laser level and the external unit is not level and the top is also not flat, one corner is lower than the rest. I think the top of the unit not being flat has made the installer think it is level when it actually isn't. One corner is about 5mm to low and another is 10mm to low
I was wondering, how to installers normally handle installing an external unit on existing flagging that isn't level? I'm thinking of getting some flagging relayed to go under it. Is flagging the best thing for an external unit to be placed on or would a concrete base be better? Are the any requirements for what it is installed on, e.g. does some of it need to be drainage rather than a firm base? E.g. is it better for all the base under the unit to be solid or just have a solid base under each foot
I had thought that my installers would mount straight onto the existing paving slabs but no, they lifted slabs, cut to fit the area they needed and mounted the ‘curb stones’ you see in the photo in a frame they made. They bedded the stones into sand and levelled them before adding the drainage stones you see. I’m not sure how much depth of sand was used but none of the condensate has ever appeared on the paving in front of the pump but is well contained within the wooden framed base area. Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@diymax welcome to the forums. There's a new product on the market called Zeus mounting feet. See attached. Would you like me to connect you with them?
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
@diymax will do. I'll send an email to their team and cc you using the email address you used to register on this forums. I'll do that tomorrow morning.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
-
Vaillant arotherm plus heat pump frost protection
5 months ago
-
Vaillant Arotherm monobloc error f.788 - ASHP is not working!
8 months ago
-
British Gas versus Octopus: Two possible heat pump routes - how to evaluate them?
9 months ago
-
Volumiser placement in Vaillant Arotherm + system?
1 year ago
-
Vaillant Arotherm Plus PCB Failure
1 year ago
- 26 Forums
- 2,102 Topics
- 46.2 K Posts
- 99 Online
- 3,388 Members
Join Us!
Latest Posts
-
RE: Ecodan consuming 100kwh per day in new build!!!
Well at least that solves the mystery of where the exce...
By JamesPa , 1 minute ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 12 minutes ago
-
RE: Plug and play solar. Thoughts?
And we have it: DESNZ are now investigating the feasi...
By Lucia , 4 hours ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 16 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 1 day ago
-
@heacol, if you're around, can you please provide some ...
By Mars , 1 day ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 1 day ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 2 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 2 days ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 2 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 2 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 3 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 3 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 4 days ago