Forums

Forums
Renewable Heating
Air Source Heat Pum...
Poor COP with an Ec...
 
Notifications
Clear all

Poor COP with an Ecodan

 
Page 3 / 3
Air Source Heat Pumps (ASHPs)
Last Post by Derek M 2 years ago
35 Posts
10 Users
1 Reactions
4,389 Views
RSS
 Gary
(@gary)
Prominent Member Member
Joined: 2 years ago
Posts: 350
03/12/2023 4:43 pm  

@adam_colwell is the unit running or it couldn’t be doing a defrost as the flow and return are the nearly the same.  if not check again when it is.  It’s only THW1 and 2 you are interested in.

THW5 is the temp of your HW TH7 is the outside temp.

Your flow rate of 14 is low try increasing it to 4 and recheck the flow rate that may improve your COP.

but as you are using a low amount of energy and assuming your house is as warm as you want it to be then I wouldn’t worry


   
ReplyQuote
 adam_colwell
(@adam_colwell)
Trusted Member Member
Joined: 2 years ago
Posts: 21
Topic starter 03/12/2023 4:46 pm  

@gary yeah the unit is currently running. So I should wait until it stops and see the temps then?


   
ReplyQuote
 Gary
(@gary)
Prominent Member Member
Joined: 2 years ago
Posts: 350
03/12/2023 5:09 pm  

@adam_colwell no the unit needs to be running but the temps weren’t any different try again in a bit see if they have changed


   
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
03/12/2023 5:12 pm  

@adam_colwell

Let me see now, if everyone had a smaller, well insulated home, would we need all these wind and solar farms, and the vast amount of grid upgrading?


   
ReplyQuote
 adam_colwell
(@adam_colwell)
Trusted Member Member
Joined: 2 years ago
Posts: 21
Topic starter 03/12/2023 5:36 pm  

@derek-m sorry, you have lost me. Its all proportional, I'm just trying to make sure my system is running the best it can. I understand people will be using more Kwh then me to heat their home, I'm trying to break it down to Kwh/m2 and reduce that to lowest is possible can be.


   
ReplyQuote
 adam_colwell
(@adam_colwell)
Trusted Member Member
Joined: 2 years ago
Posts: 21
Topic starter 03/12/2023 5:39 pm  

@gary I've turned the pump up to 5 and both TW1 and TW2 are currently at 27c


   
ReplyQuote



 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
03/12/2023 5:49 pm  

Posted by: @adam_colwell
↑

@derek-m sorry, you have lost me. Its all proportional, I'm just trying to make sure my system is running the best it can. I understand people will be using more Kwh then me to heat their home, I'm trying to break it down to Kwh/m2 and reduce that to lowest is possible can be.

Sorry Adam, my comment wasn't directed at you, I was being facetious as usual.

In other threads we have recently been discussing how much upgrading the electricity grid will require, as people change to Electric Vehicles (EV's) and install heat pumps, solar PV and battery storage, and who will have to pay for this.

I also have to smile when people come on the forum asking why it is costing an arm and a leg to heat their 'mansion' using a heat pump.

 

This post was modified 2 years ago by Derek M

   
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
03/12/2023 5:57 pm  

Posted by: @adam_colwell
↑

@gary I've turned the pump up to 5 and both TW1 and TW2 are currently at 27c

You need to reduce the pump speed to increase the DT.

 


   
ReplyQuote
 adam_colwell
(@adam_colwell)
Trusted Member Member
Joined: 2 years ago
Posts: 21
Topic starter 03/12/2023 6:01 pm  

@derek-m okay, I've decreased it to 1 and have a flow rate of 10 liters per minute


   
ReplyQuote
 adam_colwell
(@adam_colwell)
Trusted Member Member
Joined: 2 years ago
Posts: 21
Topic starter 03/12/2023 6:03 pm  

Right, now I have TW1 at 33c and TW2 at 31c


   
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
03/12/2023 6:32 pm  

Posted by: @adam_colwell
↑

Right, now I have TW1 at 33c and TW2 at 31c

You should not worry too much about the DT, if your heat pump is keeping your home warm in an efficient manner. If you have a low flowrate and low DT, then your home must not need a vast amount of thermal energy.

 


   
ReplyQuote
Page 3 / 3
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts