Octopus Cosy 6 installation (fan boy video)
Here's the first Octopus Cosy 6 YouTube installation video - I'm disappointed - the lack of questions or critical reasoning is sad to see.
Nicholas, the homeowner, managed to conjure up TJ, the Octopus heat pump big boss, which makes me question the claim that he paid for the installation - the softball questions smack of a PR agency...
TJ is the guy I had a bit of a to and fro with on Twitter - when I put it to him that Octopus using 50º design temps was offloading running costs onto customers in exchange for quick hit installs. It's interesting to me, the way he phrased his comment on this in the video which was filmed shortly after our wee debate - I used British Gas as an example to him in our discussion and he knows I'm a journalist. [🤔]
The Cosy:
Designed by a pretty reputable guy but I suspect the brief is plug-and-and-play for Mr & Mrs Jo Public who won't want to think about weather compensation curves or flow rates. That's not an entirely bad logic of course, it's a market that must be addressed and smart-arsed Octopus got in first.
It's plastic! 🤦🏻♀️
There's all the obvious criticisms of it being just plain ugly, likely to fill up with dead leaves and crap, or snow. The sensor pads in rooms (the miles of trunking on that guy's install (why the f*** did he put it outside his garden), the overselling of the refrigerant being greener and crucially, all that kit bundled inside the case.... but no one questions the data harvesting!
The Cosy can not only be 'updated' by Octopus, it can be physically run - ideally to fit smart tariff timings - but potentially also for load shifting during grid overloading times.
Meanwhile, Octopus get to harvest all that juicy data and link it to smart meter data - there's gold in them thar hills and no one asks any of the awkward questions about data privacy and rights. 💰
Oh, my days. 🙈
Like most of the comments on YouTube about the video, I can't believe where it's installed.
Surely he could have installed it inside his garden other side of the wall.
It's just asking to be damaged, or worse stolen, along with the metres and metres of copper pipework.
Surely it is there as an advertisement for Octo. If it gets nicked TJ will probably bring another, again no charge. 🤔
Daikin 6Kw ASHP.
MG4 EV
1926 Semi with loft and wall cavity insulation, all radiator.
I think @lucia raises a serious point about Kraken data harvesting. I saw on another of Nicholas's videos he talks of the EV charging Tariff Intelligent Go whereby the car has communication with Octo using the api and a sim in the car which has some control of it's functions (Roboapocalypse?). Now I do not have any expertise in these things but it seems another example of Octo harvesting data. Are they trying to be the "Google" of Energy?
Daikin 6Kw ASHP.
MG4 EV
1926 Semi with loft and wall cavity insulation, all radiator.
Looks like a gents urinal at a music festival. Only a matter of time until someone pi$$es into it.
@njt In one of his videos, Nicholas remarks that he didn’t want any units spoiling the space in his garden. 🙄 ! Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Posted by: @jancoldNow I do not have any expertise in these things but it seems another example of Octo harvesting data. Are they trying to be the "Google" of Energy?
Could well be a data harvesting example or could the Sim in the car be a simple protocol converter to enable the Octopus Kraken system to talk to the bespoke car software to control the EV charging?
5 Bedroom House in Cambridgeshire, double glazing, 300mm loft insulation and cavity wall insulation
Design temperature 21C @ OAT -2C = 10.2Kw heat loss
Bivalent system containing:
12Kw Samsung High Temperature Quiet (Gen 6) heat pump
26Kw Grant Blue Flame Oil Boiler
All controlled with Honeywell Home smart thermostat
Posted by: @allyfishLooks like a gents urinal at a music festival. Only a matter of time until someone pi$$es into it.
I’m aware that usually you have to have a DHW cylinder with a heat pump, but I invested in a Sunamp heat battery to soak up my solar as I had no facility for immersion in my old Hot water cylinder( heated by an oil burner) So my question is : is it mandatory to have cylinder? Or is it straight forward to run an ASHP system purely for heating? As my current oil fired ssystem does?
I know that there are grant stipulations about having to heat both water and space with the HO but that’s a daft rule as all
my hot water in summer etc is free via solar and even in Winter the 2kwh from the panels just about covers the power needed to top up the Sunamp daily! In summer the 4kw array and do as much as23 kWh in a day.
our House is Victorian but has EPC B ( Solar PV, 10kw heat and electric batteries, with newly installed £10k of internal insulation , 75% paid by EST)
- 26 Forums
- 2,112 Topics
- 46.4 K Posts
- 47 Online
- 3,408 Members
Join Us!
Latest Posts
-
RE: No-code, plug-and-play monitoring for your heat pump
I think I have found “The One!” Waveshare ESP32-S3-POE-...
By Grantmethestrength , 7 hours ago
-
RE: Buffers, hot water and cooling
@prunus, @jamespa is correct, but removing the buffer ...
By Brendon Uys , 12 hours ago
-
@downfield and @toddles, this isn’t in the settings cur...
By Mars , 1 day ago
-
RE: Homely launched for Grant Aerona ASHP control
I haven't bought the Aerona Smart Controller (£700!) bu...
By Prunus , 1 day ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
For the record, Grant supply ethylene glycol for their ...
By Prunus , 1 day ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer amazing. Well done!
By Mars , 2 days ago
-
RE: Wood burner with ASHP - direct air?
@sune is ideal to answer this, but I think he's on vaca...
By Mars , 2 days ago
-
RE: Say hello and introduce yourself
Hi @topher - you might be interested to see this very r...
By Transparent , 2 days ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 4 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 4 days ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@rikiarn - just have a think as to how much it will cos...
By Transparent , 4 days ago
-
Don't do much digging around.That's best left to the pr...
By Transparent , 4 days ago
-
Hi all, I was wondering if anyone had an idea of how th...
By Wh0am3ye , 4 days ago
-
RE: EBAC re-entering the ASHP market in 2023
@toodles confirm i have Ebac 5kw ASAP + homely and it w...
By marcinwloch69@gmail.com , 4 days ago
-
RE: Compute heat loss from energy used
@jamespa Ebac must be similar to Mitsubishi as they buy...
By marcinwloch69@gmail.com , 4 days ago
-
@pie_eater I have been thinking of adding cooling to my...
By TechnoGeek , 7 days ago
-
RE: Victorian Semi Retrofit / Extension ASHP and UFH Advice
Agree, but you may have a hard time convincing them, as...
By JamesPa , 1 week ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
Hi - fyi - there's a dead image link in the 'Optimal In...
By seatonian , 1 week ago
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
@chandykris Horses and beggars…. 😉 Toodles.
By Toodles , 1 week ago
-
RE: Cleaning up after gas meter removed
@agentgeorge Likewise in the loft space; we have 300mm ...
By Toodles , 1 week ago