Notifications

Clear all

New Ecodan user looking for some advice

Air Source Heat Pumps (ASHPs)

Last Post by ecodan-efficiency 8 months ago

5 Posts

4 Users

4 Reactions

2,009 Views

RSS

PumpItUp

(@pumpitup)

Eminent Member Member

Joined: 3 years ago

Posts: 7

Topic starter 02/01/2023 12:15 pm

Hi folks, we’ve just moved in to a new build with an Ecodan heat pump, it was set up very inefficiently, but thanks to the wonderful info on this forum our COP is looking a lot better, so thanks for that!

I have set it up to run with a weather compensation curve and 38c @ -3c flow temp seems to be doing the trick (very cold here just now).

I’ve scheduled the hot water to run for an hour in the morning and an hour in the evening @ 48c, seems to work nicely.

I’ve scheduled the heating to turn off from 12am - 6am to cool things down a couple of degrees overnight and to quieten things down, as the tank is between two bedrooms. I’ve noticed when the heating and hot water are both off, there is still a circulation pump running constantly, is this normal? The actual heat pump fan is shutting off as expected during this time.

the master bedroom has been made a zone and the radiator has no TRV, so it was getting really hot with the heating running all night, I’m not sure if there is any other way to avoid this other than switching off?

Just wondering if this all sounds ok, as I’m a total newbie and have no friends with heat pump systems to discuss with.

Cheers

Quote

Kev M

(@kev-m)

Famed Member Member

Joined: 4 years ago

Posts: 1276

02/01/2023 2:53 pm

Hi @pumpitup and welcome. It sounds like you're doing things right. Well I would say that as you're doing almost exactly what I do. Not sure what you mean by Switching off but you should be able to use the timer on the main controller to turn one zone off at night if you want (maybe this is what you are doing anyway). Let me know if you need more details on how to do this.

The pump running might be the Freeze Stat function. Depending on how it's set it comes on when the outside temp runs below a set level. It pumps the water round and heats it up if the flow drops below a certain level. It's easy to change or disable. Once again shout if you want to change and don't know how. Btw Freeze Stat it uses very little power.

I find switching off at night with the timer a good option. It definitely saves us money and keeps the bedrooms a bit cooler, which we like.

👍

ReplyQuote

PumpItUp

(@pumpitup)

Eminent Member Member

Joined: 3 years ago

Posts: 7

Topic starter 02/01/2023 10:38 pm

Thanks for the reply Kev, I’d never thought about shutting off the bedroom zone, I only just realised yesterday that I need to schedule both the zones to turn off for the pump to shut off overnight, need to do a degree in this stuff 🤣

I’ve scheduled it to shut off the bedroom zone earlier than the living room tonight so will see how that goes.

the freeze stat function would make sense as it’s below zero here just now, I’ll see if the pump shuts off at night when things get a bit warmer.

Cheers!

👍

ReplyQuote

ggenergy

(@ggenergy)

New Member Member

Joined: 8 months ago

Posts: 1

14/12/2024 11:42 am

@pumpitup Hi mate. I just moved into a place this week and similar issue. Would you mind giving me some advice as to how you did it? My pump is running 24/7 and does not stop so very inefficient at moment. Any help would be appreciated.

This post was modified 8 months ago by Mars

ReplyQuote

ecodan-efficiency

(@ecodan-efficiency)

Trusted Member Member

Joined: 10 months ago

Posts: 29

14/12/2024 5:39 pm

@ggenergy It's all in here:

If you are turning it off then you should have glycol in the system to protect in the event of sub-zero temps (there is a danger that the water in the heat exchanger, in the outdoor unit, will freeze during periods when it's not running. Not to mention exposed, although probably insulated, pipes).

It's annoying there's not more flexibility in the temperature range for the freeze stat function. Seems entirely arbitrary given that you might be comfortable, knowing your glycol levels, having it only come on at, say, -5 outside temp etc.

It's also worth noting that the running pump does not use much energy - although I appreciate the noise may be an issue!

This post was modified 8 months ago 2 times by ecodan-efficiency

ReplyQuote