Notifications

Clear all

New 12kW Samsung heat pump

RE: New 12kW Samsung heat pump

rsk14 · 2021-12-08T19:45:03Z

Hi, just had a 12kw Samsung installed, to find the most economical way to run the system without having to take out a mortgage to pay for the electricity. This site is great apart from the fact that the majority of things you are talking about such as flow temperatures, weather compensation control and so on mean absolutely nothing to me lol. Do I need to know these things? My husband has no interest what-so-ever, so all up to me! Thank you in anticipation

Page 3 / 3 Prev

Air Source Heat Pumps (ASHPs)

Last Post by Dunlorn 3 years ago

31 Posts

9 Users

14 Reactions

9,010 Views

RSS

Kev M

(@kev-m)

Famed Member Member

Joined: 4 years ago

Posts: 1276

16/01/2022 10:58 am

Posted by: @rsk14

Finally (fingers crossed) getting our MMSP monitor fitted tomorrow, is there anything I should know or ask about this? Thanks - still trying to get my head around all this.

I'm still waiting for mine to be fixed after it was installed months ago. Make sure you get to see it working; something I didn't do. And you'll need the right documentation to be able to claim the extra RHI so make sure you get that.

👍

ReplyQuote

rsk14

(@rsk14)

Eminent Member Member

Joined: 4 years ago

Posts: 11

Topic starter 16/01/2022 11:09 am

Posted by: @kev-m

Posted by: @rsk14

Finally (fingers crossed) getting our MMSP monitor fitted tomorrow, is there anything I should know or ask about this? Thanks - still trying to get my head around all this.

I'm still waiting for mine to be fixed after it was installed months ago. Make sure you get to see it working; something I didn't do. And you'll need the right documentation to be able to claim the extra RHI so make sure you get that.

Thank you will do.

ReplyQuote

Derek M

(@derek-m)

Illustrious Member Member

Joined: 4 years ago

Posts: 4427

17/01/2022 2:09 pm

Posted by: @rsk14

Finally (fingers crossed) getting our MMSP monitor fitted tomorrow, is there anything I should know or ask about this? Thanks - still trying to get my head around all this.

Hi rsk14,

For accurate temperature measurement the temperature sensors need to be mounted in pockets (thermowells). Ensure that the arrow on the flow meter is pointing in the direction of the water flow. Ensure that the electricity meters and heat meter are connected correctly to the heat pump controller and that the pulse rates are correctly set.

👍

ReplyQuote

witchcraft

(@witchcraft)

Reputable Member Contributor

Joined: 4 years ago

Posts: 91

18/01/2022 2:48 pm

@kev-m Same here, it should be sorted Thursday and I will want to see it working

ReplyQuote

witchcraft

(@witchcraft)

Reputable Member Contributor

Joined: 4 years ago

Posts: 91

25/01/2022 4:14 pm

Well they came and they cocked that up too. No MMSP arrangement document, no explanation (they just left site), Passiveliving site is only reporting internal temperature, ASHP power draw and immersion heater usage.

Screen shot attached. I'm bloody livid!

ReplyQuote

Sambag

(@sambag)

New Member Member

Joined: 3 years ago

Posts: 2

05/01/2023 7:24 pm

I have a similar Samsung heat pump as is being discussed. The controller is the same as the instruction manual somebody posted earlier on in the thread.

My question is, is there a way to set up the ASHP to a different water law during the day compared to the night? Or something similar. I basically want a law for the day while I’m at home, And I believe the heat pump would be best running all the time, however, it’s coldest at night and therefore radiators will be warmest and I wake up hot. I’d prefer it to be a stable rad temp at night that makes sure the house doesn’t drop too far and then apply the water law during the day. Is this possible without manually doing it every day?

ReplyQuote

Dunlorn

(@dunlorn)

Estimable Member Member

Joined: 3 years ago

Posts: 79

06/01/2023 5:47 pm

@sambag I have 2 x 12kW Samsungs and not aware of any means to change the weather compensation as you suggest, without regular manual intervention. Mine are "controlled" via a Hive thermostat that I programme for a constant 18°C during the day and set back to 16°C overnight (2300-0400). This means, except in very cold weather, they are mostly off overnight but the temperature doesn't drop so far that they have too much work to do in the morning. Not sure this is always an optimum arrangement, just what I'm trialling at the moment.

2 x 12kW Samsung Gen6 ASHP, 5.6kW solar PV ground mounted c/w 10kWh Puredrive battery & Solis inverter.

ReplyQuote

Page 3 / 3 Prev