LG Therma V problem - rads only come on when UFH is calling for heat
We have a 12kw mono block pump running UFH in a number of downstairs rooms. It also runs radiators upstairs. The overall the system is controlled by the LG controller, the Heatmiser Wiring Centre (for UFH and DHW), the Heatmiser RF Switch (for Radiators), Heatmiser thermostats for each room downstairs and one for upstairs rads, and one main pump for flow. There seem to be 2 other pumps but I am not sure of their purpose.
My problem is that the upstairs radiators do not come on unless at least one room with UFH downstairs is creating demand so that the ASHP Controller is on. We did not request this, not that we given any options, and it seems to me to be either wrongly wired or it needs a second pump. Either way, are we wrong to think there should not be a dependency such as this built in ?
We have a similar issue, but the way we’ve overridden our on-off issues is to either set one of the thermostats that calls for heat to a high temperature your system will never hit or (which is what we’ve done) is switch our Salus controller for our thermostats to “always on” and not auto. This way the system is always calling for heat and with weather compensation on it should operate in the background.
If you have the Heatmiser app, you can set it to always on for your UFH which should then keep your rads running.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
- 26 Forums
- 2,102 Topics
- 46.2 K Posts
- 44 Online
- 3,388 Members
Join Us!
Latest Posts
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer great you located the source of the issue a...
By Mars , 25 minutes ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 9 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
From what you say about the radiators upstairs it does ...
By JamesPa , 15 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 18 hours ago
-
@heacol, if you're around, can you please provide some ...
By Mars , 21 hours ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 21 hours ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 1 day ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 1 day ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 2 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 2 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 2 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 3 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 4 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 4 days ago