This is very interesting - I have just had my ASHP split system serviced today by Daikin (actually an agent of theirs). I know the guy took photos of the units, including the interior of the indoor unit, brushed down the outdoor unit but didn't clean it, tested the system water which he said was good, inspected and I assumed cleaned the filter. Other than that I don't know what he did; he was here about an hour. I believe he's going to email me details of what was done.
This is the first inspection/service on their Gold Service plan.
Now, having read the articles linked above, I realise this was the inspection described. It is an insurance on the Daikin items only. No radiator was looked at, and as my unvented HW cylinder is not a Daikin I suppose that wasn't "serviced" either. I have no idea what that involves, could anyone explain please?
@heat-pump-newbie In my case (also Gold Service contract) the Daikin service was carried out by themselves rather than an agent. I had two service visits a year apart and the monobloc cabinet was never even opened on either occasion.
The ‘Free Special Service’ that was arranged subsequently involved a different engineer removing the monobloc casing, checking tightness of contacts, cleaning the fan, casing and checking the condensate drainage channel plus removing and checking the Y filter.
The whole system was connected to the engineer’s laptop and some proprietary software was run to check the whole system at rest and under load. The secondary circuit from the LLH onwards was not checked, nor was the inhibitor dilution and cleanliness checked. The Magna Clean filter had been opened and cleaned during the second ‘cursory’ service weeks before. I have now contacted my installer about future servicing needs (they also include inhibitor checking in their check list). Up until this point, I had thought that using the manufacturer’s own service scheme would have been a wise decision… Regrets, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Sadly my heat pump is a split system so I assume I need an F gas licenced engineer, or at least F gas licenced company, to service it, and they seem to be few and far between. I have no idea if my service engineer did anything with the refrigerant. To my knowledge once it's in it stays in (barring a catastrophe of course, which I shouldn't rule out as it's had one already).
@heat-pump-newbie Oh Dear! 😳 No one wants a cat a stroph!
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Posted by: @morganThe last service on my Ecodan in November 2024 cost £333.65, which included a mileage fee of £63.00 (+ VAT). Tell me that isn't extortionate! I am desperately looking for a service agent closer to Derby to at least save some mileage costs, but I can't find one. If anybody can recommend somebody close to Derby, I'd be grateful.
Having made some enquiries locally I have found a company that will service my ASHP for £135 (inc VAT). They get excellent reviews as a company so I will give them a try at the next service which is due in November.
I won't post a link but you can search for a company named 'Henman Dunn' In Ripley, Derbyshire.
Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.
2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.
Just an example how far our Rae will go to service and diagnose all for less than £180 on a heat pump.
Reported, serviced, diagnosed and super happy customer waiting for a new flow switch thats warn and fails in the pocket but works outside the pipe.
Professional installer. Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.
@ashp-bobba And super happy fish too I expect 😊 Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
For reference, our installer has just contacted us after first year offering service of Heat Pump and cylinder for £250. They mentioned checking and cleaning filters, checking and topping up glycol levels.
Samsung 12kW gen6 ASHP with 50L volumiser and all new large radiators. 7.2kWp solar (south facing), Tesla PW3 (13.5kW)
Solar generation completely offsets ASHP usage annually. We no longer burn ~1600L of kerosene annually.
@old_scientist Probably okay if they are servicing the heat pump too, often they just service the heating system indoors as not F Gas qualified. We charge £158 plus vat but don't service the cylinder (really just needs the PRV checking but you should be G3 'trained') We do however fully service the heat pump which includes gas leak checks, yes they can leak, we've seen quite a few, normally the 4WV or any flimsy 1/4" stub.
@morgan They may be good but cannot service the heat pump as they don't appear to be F Gas reg, therefore cannot leak check and limited to what they know and can do. Happy to be proved wrong but the price you quoted normally says it all.
Many thanks for that info. Looks like I will be sticking with the original then.
Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.
2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.
Posted by: @dgclimatecontrol@old_scientist Probably okay if they are servicing the heat pump too, often they just service the heating system indoors as not F Gas qualified. We charge £158 plus vat but don't service the cylinder (really just needs the PRV checking but you should be G3 'trained') We do however fully service the heat pump which includes gas leak checks, yes they can leak, we've seen quite a few, normally the 4WV or any flimsy 1/4" stub.
@dgclimatecontrol I asked them if they check (and top up) the refrigerant levels during the service and they said no. I said this is specified on the Samsung service schedule, and they said they'd know if there were refrigerant leaks as there would be an error code on the controller. I'm not buying that explanation - I'd appreciate other's thoughts?
I've agreed to the service, mainly to retain the warranty. I'll observe what they do for future reference, but from checking the service schedule, much of it is observation checks and cleaning, all of which I can do myself. The only things I can't easily do is check and top up refrigerant levels and glycol anti-freeze levels (less concerned about these as we have battery backup so the unit is very unlikely to freeze with continuous running of circulation pumps). Only other thing I've not previously done myself is clean a mag filter, but I'm sure it's something I can learn/do in future.
Samsung 12kW gen6 ASHP with 50L volumiser and all new large radiators. 7.2kWp solar (south facing), Tesla PW3 (13.5kW)
Solar generation completely offsets ASHP usage annually. We no longer burn ~1600L of kerosene annually.
-
Heat pump servicing and maintenance
3 years ago
Recently viewed by users: RobS 54 minutes ago, dgclimatecontrol 1 hour ago.
- 26 Forums
- 2,131 Topics
- 46.8 K Posts
- 18 Online
- 5,656 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Say hello and introduce yourself
Welcome to the forum, please feel free to ask any quest...
By JamesPa , 30 minutes ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@heat-pump-newbie Yes you need F Gas engineers like us ...
By dgclimatecontrol , 2 hours ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@editor I know it was formally announced at Ish the oth...
By PatrickVito , 7 hours ago
-
@moman0311 welcome to the forums. I've received your em...
By Mars , 9 hours ago
-
RE: Anyone still weathering it out with Agile?
Yes, but now try finding a working phone box….
By Majordennisbloodnok , 1 day ago
-
RE: Thermostat for Ideal Logic Air with 3 zone support
No harm at all in plumbing it as 3 zones, I would have ...
By JamesPa , 1 day ago
-
RE: ASHP heat output monitoring
@carlo I see there is a discussion in Facebook user gro...
By Tim441 , 1 day ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
MCS have set a potential trap in the new version of MCS...
By JamesPa , 2 days ago
-
RE: Who has a V2G EV installation
General comment on battery care... I guess if ev is on ...
By Tim441 , 3 days ago
-
@old_scientist like for like comparisons are almost imp...
By Tim441 , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist There is an option in the Tesla app that...
By Toodles , 3 days ago
-
RE: Mitsu Wireless Controller and MelCloud
On the FTC5 I think this requires the dip switch on the...
By Abernyte , 3 days ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
@old_scientist me too. Just installed my new heat pump ...
By Eliuccio , 5 days ago
-
RE: Is your heat pump insured?
Yup just spoke to Privilege to inform them of my impend...
By Scalextrix , 5 days ago
-
RE: Forum updates, announcements & issues
Just to keep everyone in the loop, as the site continue...
By Mars , 5 days ago
-
RE: Fast DHW setting on Midea (Clivet) heat pump
@simon-w, is this something you could potentially assis...
By Mars , 6 days ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Fwiw I called my installer out for the first time a few...
By JamesPa , 6 days ago
-
RE: Long term efficiency degradation
@jamespa yes as I thought thanks. We have a reaso...
By Scalextrix , 6 days ago
-
RE: Sunamp Thermino Heat Battery
@jamespa A few days after the installation had been com...
By Toodles , 1 week ago
-
RE: Planning Permission May 2025
Fair enough. I have read the legislation and MCS020a ...
By JamesPa , 1 week ago