Flushing an ASHP system (and UFH) questions
Hi all, it looks like my 3.5 year old ASHP (UFH heating downstairs, radiators upstairs) system may need a flush. How such a new system needs a flush is another matter. But I have some general questions for those with more knowledge on such matters.
- Is the process to flush an ASHP system different to a gas one?
- Is the process different for UFH to that for radiators? For example I see videos online of people agitating (with hammer drill) the radiators to loosen dirt.. but surely that would not work with the floor.
- Is the magnet vs high-pressure method of flushing better suited for a) ASHP and b) UFH?
- In other words can any one offering flushing work on my system or do I need to aim for somebody who have experience with ASHP/UFH?
Thanks!
Mitsubishi Ecodan 11.2kW ASHP
Have you had the strainers and metal filters cleaned out? There is a sump on the isolation valve on the outdoor return pipe which has a steel strainer to collect debris. This is the last sump on the return pipe before the circulating water passes through the heat pump. It can get clogged if it’s not cleaned out regularly. This should be done on a regular service. You will need to switch power off to the outdoor unit and isolate both isolation valves before undoing the sump nut. It’s important to return the strainer into place as it stops particles getting lodged in the plate heat exchanger of the heat pump. Water pressure usually needs to be adjusted after inspection. There are other areas where debris can collect.
- 26 Forums
- 2,122 Topics
- 46.6 K Posts
- 94 Online
- 4,529 Members
Join Us!
Podcast Picks
Latest Posts
-
OK... I'm here. But the amount of my time needed to add...
By Transparent , 2 minutes ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 5 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 13 hours ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 18 hours ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 20 hours ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 22 hours ago
-
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 2 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 2 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 3 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 4 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 4 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 4 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 4 days ago
-
RE: Say hello and introduce yourself
@editor fab - thanks Mars, and keep up the great work o...
By normpang , 4 days ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 So I think the 1st zigzag section shows so...
By ASHP-BOBBA , 5 days ago