Forums

Forums
Renewable Heating
Air Source Heat Pum...
Ecodan Flow tempera...
 
Notifications
Clear all

Ecodan Flow temperature

 
Air Source Heat Pumps (ASHPs)
Last Post by Abernyte 9 months ago
4 Posts
2 Users
2 Reactions
660 Views
RSS
 Westkent
(@westkent)
Estimable Member Member
Joined: 2 years ago
Posts: 54
Topic starter 31/10/2024 3:20 pm  

The graph below shows my flow temperature rocket to 60 degrees whilst the system is heating the hot water.

Flow temperature is normally at around 34 degrees.

Im running on auto adaptation with a hot water setting of 55 degrees with an 8.5kw system.

Is this perfectly normal or possibly a dodgy setting elsewhere in the system.

Thanks in advance 

image
image
This topic was modified 9 months ago by Westkent

   
Quote
Abernyte
 Abernyte
(@abernyte)
Honorable Member Member
Joined: 3 years ago
Posts: 235
31/10/2024 3:31 pm  

That seems similar to that which I see on my system. The >60 flow temp is only sustained for around 15 mins before dropping steadily downwards. 14kW HP


   
👍
1
ReplyQuote
 Westkent
(@westkent)
Estimable Member Member
Joined: 2 years ago
Posts: 54
Topic starter 02/11/2024 3:03 pm  

Posted by: @abernyte
↑

That seems similar to that which I see on my system. The >60 flow temp is only sustained

for around 15 mins before dropping steadily downwards. 14kW HP

Abernyte, seems as you state you’ve similar results to mine, does your hot water lose around 1 degree an hour as mine does as I’m under the impression that’s a bit high??

 


   
ReplyQuote



Abernyte
 Abernyte
(@abernyte)
Honorable Member Member
Joined: 3 years ago
Posts: 235
02/11/2024 5:14 pm  

DHW temp loss is not at steep as 1C per hour. Overnight starting from 50C I usually see a 8C drop over about 12 hours.


   
👍
1
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts