Notifications

Clear all

DHW SET UP with Samsung gen 5

Alfapat · 2025-06-12T18:00:20Z

Using the timer is more efficient for most people most of the time. [/quote] Thank you OK that was Gen 6. So Iam going to start a new thread as I need some help. I have never had to use the controller on my Gen 5 HP as it has been set up for cycling to reheat the dhw when the temp drops by 5c. My new plan which has bee prompted by quaker is to heat my water during the Octopus Cosy tarriff which when the cheap periods are 4-6am , 3-4pm and 10-12am. So firstly I can set my controller clock which is never used as the Danfoss thermostat times the system but not dhw. Searching on line I found a set up off gen 5 manual for introducing Daily dhw times but as far as Ican see its only 3am to 6pm for hating water but that doesnt suit the tarrif times . Or can it be for three times activated. Can any one advise please.

Page 3 / 3 Prev

Air Source Heat Pumps (ASHPs)

Last Post by JamesPa 2 months ago

28 Posts

5 Users

2 Reactions

844 Views

RSS

Alfapat

(@alfapat)

Reputable Member Member

Joined: 3 years ago

Posts: 182

Topic starter 16/06/2025 12:13 pm

Space heating is controlled by Danfoss thermostat and hasn’t been on as set to 20c and not needed . Here are my results , on the 10 Fsv’s only one needs noting as the rest is to do with room heating /cooling. So 10:51 is DHW Tank heating set at 54c 10:52 40c max/min

The 30 values written on the attached

Next is the timer for Daily . The first two slots are on off as you will see.

The last picture shows when timer settings goes back to Home Screen when Esc is activated .
I hope this helps Also attached is this note at the end of Daily settings in the Manual. FSV VALUE?

This post was modified 2 months ago by Alfapat

ReplyQuote

JamesPa

(@jamespa)

Illustrious Member Moderator

Joined: 2 years ago

Posts: 2719

16/06/2025 3:37 pm

@alfapat

OK Im a bit stumped, but the good news is that someone in another thread has got it working (it may be a different generation but at least it gives a point of comparison), I have asked them to comment and you might wish to PM them.

I think the cryptic note you posted refers to 3031. This is a bit strange and suggests somehow they have economised on output or internal registers and combined two functions in a confusing way.

Can you check FSV 5041 which should be set to 0, and also 4011 and 4012.

Perhaps set the on time (initially) to something where you can monitor the operation (eg 5 mins after whatever the time is when you set it) and watch what happens and also check the actual water temperature at the time, temporarily modifying 3023 (or the target DHW temp set on the user display) if necessary so it should definitely trigger.

4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.

ReplyQuote

Alfapat

(@alfapat)

Reputable Member Member

Joined: 3 years ago

Posts: 182

Topic starter 16/06/2025 5:29 pm

So I have done a short set up and it worked!I could get any lower difference than 5c so hiked up to 55c and set the timer , it seems to work now .

My main trouble seems to be that the controller is not saving my set times , when I go over the slots they have changed in some and not others.

I will go over them again this evening , but its so annoying! Thanks for your help ....again.

ReplyQuote

JamesPa

(@jamespa)

Illustrious Member Moderator

Joined: 2 years ago

Posts: 2719

16/06/2025 5:46 pm

Posted by: @alfapat

↑

So I have done a short set up and it worked!I could get any lower difference than 5c so hiked up to 55c and set the timer , it seems to work now .

My main trouble seems to be that the controller is not saving my set times , when I go over the slots they have changed in some and not others.

I will go over them again this evening , but its so annoying! Thanks for your help ....again.

Thats good news indeed, you are very likely almost there!

4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.

ReplyQuote

Page 3 / 3 Prev