Recent Posts

| Forums | Topics

Page 96 / 167 Prev Next

Posts with their shortened content
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	So an update… Installers insist a replacement 80 litre buffer tank/LLH is required. They’ve sent me a schematic, from Grant Install pack B. And a mail from Grant justifying it: Protection agai...
	RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh? By AllyFish, 2 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	Well, it sounded all too good to be true. And it was. After several months hanging on the waiting list, I finally poked Octopus into giving me an update. Turns out the Power Pack Bundle eligibility cr...
	RE: Effect of Mitsu PAR WT60 Wireless Controller By SUNandAIR, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@davidalgarve I was wondering how your home performs (loses or retains heat) in these milder conditions? Since, if it’s only 17c outside at the moment what would be the indoor temperature if there was...
	Buying a new EV charger By Batpred, 2 weeks ago Forum Safety, Regulations, Tools, Plumbing & DIY Installations
	I had an EV car for a few years and an EV charger for a bit longer.You may wonder why I didn’t wait until ordering my BMW and let the salesperson “handle that for me”? Everyone’s different. We read th...
	RE: Getting ready for export By Majordennisbloodnok, 2 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	I’m frankly amazed you think anything I have posted on this thread has been confusing. However, that’s irrelevant. My primary goal - and responsibility - here is to ensure the information provided on ...
	My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus By jords, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	This is going to be a long post. But wanted to share my experience with 3 companies around heat pump surveys. So a bit of background first. Live in a 4 bed property around 167m2. Have 2 small childre...
	RE: Mixergy Tank Failure By bontwoody, 2 weeks ago Forum Domestic Hot Water & Cylinders
	I may have found the problem. There is a valve on the return side to stop the water when it was originally plumbed in with nowhere to connect to. It was closed! I've opened it and will try again tonig...
	RE: Getting ready for export By Batpred, 2 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	@majordennisbloodnok You are causing a lot of confusion. Do not overthink this
	RE: Master & Slave Zones/Setback By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	In principle you probably don't at present given it's (presumably) still quite mild, depending on location. Most likely one alone has sufficient capacity (and may do down to quite a low temperature d...
	RE: Master & Slave Zones/Setback By bretix, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa sorry yes I have set wc 2102 set at 44ç (max outgoings water temp) 2103 set at 28ç (min outgoings water temp) 2104 set at 0ç ( default min outdoor temp) 2105 set at 20ç (max outdoor temp) Bot...
	RE: Replacing knackered oil boiler with Samsung ASHP - Perthshire By DowallyDrifter, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thanks for your full reply @mike-h. It certainly cleared up most thoughts thoughts. When the heat pump heats DHW the flow temperature will peak in the high 50's when the target temperature for DHW i...