Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 89 / 166
Posts with their shortened content
RE: Octopus Cosy Heat Pump Owners & Discussion Thread  

By AndrewJ, 2 weeks ago

  Thanks. Hopefully others will be along to comment on their experiences and set up.  
RE: Octopus Cosy Heat Pump Owners & Discussion Thread  

By JamesPa, 2 weeks ago

  Yes if it results in the heat pump being cycled on and off, which clearly it does. In this circumstance it's the average you need to think about which is 0.8kW consumption. It's on-off control not ...
RE: Octopus Cosy Heat Pump Owners & Discussion Thread  

By AndrewJ, 2 weeks ago

  Like I said in my earlier post above, the Cosy is designed to operate in a cycling manner: that is, it is controlled solely by the temperature reading of the Primary Pod with a hysteresis of +-0.1c. ...
RE: Octopus Cosy Heat Pump Owners & Discussion Thread  

By JamesPa, 2 weeks ago

  Between 0 and 4 it appears to be cycling with an average power in of 0.8kW and an OAT of 5C. Why do you think this is high. It suggests about 3kW to house, so a house loss of perhaps 6kW at -3. Is ...
RE: Octopus Cosy Heat Pump Owners & Discussion Thread  

By AndrewJ, 2 weeks ago

  I have the radiators balanced and all TRVs fully open. I wanted to understand more about how the Cosy actually worked, seeing if anyone else had tried to set it up to run continuously, what other Cos...
RE: Melcloud and Havenwise  

By Westkent, 2 weeks ago

  @davidalgarve that’s exactly what’s required. im with Havenwise myself. everything seems to be working fine.
RE: RDSAP10 effect on existing heat pump EPC rating?  

By Mike Patrick, 2 weeks ago

  Just returning to this issue after a few days working in Riyadh. Lots of heat pumps there but for aircon rather than heating! Petrol is about 40 pence per litre and electric cars rare (apparently beca...
RE: Melcloud and Havenwise  

By DavidAlgarve, 2 weeks ago

  Perhaps we should wait for HavenWise to confirm, but I have just installed the Wireless Controller Model PAR-WT60 transmitter and receiver in the belief that this is what they require. Unfortunately!...
RE: Melcloud and Havenwise  

By DavidAlgarve, 2 weeks ago

  @bontwoody Please don't take my word for it. I said it looks like the WiFi Interface but it is not quite like the one I have (see photo) and they may have updated it. Attachment : IMG_2093.jpg
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters  

By Old_Scientist, 2 weeks ago

  I wholeheartedly agree with everything @allyfish has written, and our journey was similar. We had microbore piping in our old system. Until we started ripping it all out as part of a full re-plumb, I...
bontwoody RE: Melcloud and Havenwise  

By bontwoody, 2 weeks ago

  @davidalgarve thanks. Looks like i could have been wrong again 😆
RE: Melcloud and Havenwise  

By DavidAlgarve, 2 weeks ago

  That looks like the wireless adapter to allow the Ecodan to communicate with MelCloud. My understanding (and what I am working towards) is that HavenWise require the PAR-WT50/60 Wireless transmitter ...
Page 89 / 166

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO