Recent Posts

| Forums | Topics

Page 147 / 167 Prev Next

Posts with their shortened content
	RE: Glycol By Westkent, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	After a bit of a winge to my landlord they’ve now agreed to flush out the Glycol and install anti freeze valves. Heres hoping that will push up my COP
	RE: Mitsubishi Ecodan F8 error By Mars, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Almost certainly one for @ashp-bobba to put his Ecodan error codes to the test 😉
	RE: Daikin 9kW to 8kW Swap Offer from Octopus By Terry1812, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@matban , I have a couple of thoughts. 1) consumer protection act 2015, fitness for purpose. 2) You appear to be saying you have heat loss of 5kw, so if you get an 8kw, so over the top, BUT as it’s t...
	Mitsubishi Ecodan F8 error By HJD, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi all - I haven’t been active for a while but still keep an eye on the ever helpful forum. Just wondering if anyone has experienced an F8 error code with the Mitsubishi Ecodan PUZ series? A neighbour...
	RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix By Transparent, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Having just watched the latest Podcast of Mars talking with @pirate-rich I must express my disappointment. Not only was no pirate in sight, but there was a complete absence of any Swashing and Buckli...
	RE: Testing new controls/monitoring for Midea Clone ASHP By cathodeRay, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I think you are onto something here. From the Engineering Data manual: Attachment : image.png But that appears to be for 'AUTO MODE' and I can't find anything that says what 'AUTO...
	RE: Testing new controls/monitoring for Midea Clone ASHP By benson, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@papahuhu I need three reheats to cater for our DHW usage. Regarding homely there’s obviously a distinction between cycling and just turning off. Our homely would tend to overshoot and then turn off i...
	RE: Testing new controls/monitoring for Midea Clone ASHP By Papahuhu, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Just out of interest, what is the driver for you to run the DHW cycle 3 times in 24 hrs? Wouldn’t that be adding significant power consumption compared to a single run. The other observation is that y...
	RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters By JamesPa, 4 weeks ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@davidnolan22 So far as I can tell from the 'other place' (buildhub) there are customers that absolutely insist on microzoning however much their peers on the forum tell them otherwise. It's perhaps...
	RE: Testing new controls/monitoring for Midea Clone ASHP By benson, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Noooo @cathoderay any idea what setting this might be? I wonder if it is T4autohmax? The default value for this is 17, which does seem to be the OAT at which heating shuts off, but the circula...
	RE: Renewables & Heat Pumps in the News By Transparent, 4 weeks ago Forum Well & Truly Off The Grid
	Apologies @judith I could've made my point clearer if I hadn't clipped my screenshot that small. Let me post the relevant section of the Report again, but see my highlights in the previous paragraph, ...
	RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters By Mars, 4 weeks ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	It’s the complete lack of design, planning and execution in so many installs that really gets to me. Our original system was bodged from day one. Every time we raised concerns, the stock response from...