Recent Posts

| Forums | Topics

Page 47 / 73 Prev Next

Posts with their shortened content
	RE: Help me understand my Mitsubishi Ecodan system By Abernyte, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Does the big on/off button at the top left corner of the MelCloud front page not do that?
	RE: Help me understand my Mitsubishi Ecodan system By Gary, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@robs Is this only in the newer controllers I don't have that option on my FTC5
	RE: Help me understand my Mitsubishi Ecodan system By RobS, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Mitsubishi have a setting called summer mode for this. It's in the service menu under Operational Settings. There are settings for switching summer mode on/off, ambient on/off temperatures and how oft...
	RE: Help me understand my Mitsubishi Ecodan system By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	In addition to the above you might want to balance out the buffer so it is acting as if not there. Adjust pump speeds for minimum difference in temp between the two flow ports (flow from hp and flow ...
	RE: Ecodan Legionella cycle - immersion heater problem By Transparent, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thanks for letting us know @clockworks I admire your optimism that the thread is now 'closed'. It'll get re-opened at some point...... when someone actually contracts legionnaires disease. There will ...
	RE: Ecodan Legionella cycle - immersion heater problem By Clockworks, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Just to close this. Finally had the installer back last week to fit an immersion thermostat with a higher rating. As expected, no more rapid switching, immersion stays on and water gets up to temper...
	RE: Help me understand my Mitsubishi Ecodan system By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	It sounds like you get it, maximise the load by opening everything up, cancel mixing by setting the mixer valve temp to max, and then batch heat your slab (assuming you have one). I don't know how mu...
	RE: Help me understand my Mitsubishi Ecodan system By GergoH, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa Thanks for telling the cold hard truth 🙂 Even though it sounds bad I'm pretty optimistic right now.Replacing the heat pump with a smaller model doesn't make much sense for me financially spea...
	RE: Help me understand my Mitsubishi Ecodan system By davidnolan22, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@gergoh The 8kw newish r290 Mitshi machine can modulate really low. might be a good option.