Recent Posts

| Forums | Topics

Page 46 / 73 Prev Next

Posts with their shortened content
	RE: Getting the best out of a heat pump - is Homely a possible answer? By Toodles, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@potatoman Our Homely also controls the secondary (Wilo Pico) pump that is positioned post LLH flow output. In fact, I had to wait for Evergreen to incorporate this feature into the Homely controller ...
	RE: Help me understand my Mitsubishi Ecodan system By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Yes Yes to the first No to the second (I think) as this results in cold return water being swept up into the flow, reducing the flow temp to emitters for any given flow temp from the HP. Thus the HP...
	RE: Help me understand my Mitsubishi Ecodan system By GergoH, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa Please correct me if I'm wrong here, but isn't the temperature difference between each pair of ports a function of the difference in flow rate on the two sides of the buffer? For example: - ...
	RE: Getting the best out of a heat pump - is Homely a possible answer? By Potatoman, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	If you have a buffer tank you will have a post buffer tank pump, when I had my Homely fitted I had to rearrange the electrics for this as it was wired via 3rd party controls which got removed so now ...
	RE: Help me understand my Mitsubishi Ecodan system By Abernyte, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Does the big on/off button at the top left corner of the MelCloud front page not do that?
	RE: Help me understand my Mitsubishi Ecodan system By Gary, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@robs Is this only in the newer controllers I don't have that option on my FTC5
	RE: Help me understand my Mitsubishi Ecodan system By RobS, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Mitsubishi have a setting called summer mode for this. It's in the service menu under Operational Settings. There are settings for switching summer mode on/off, ambient on/off temperatures and how oft...
	RE: Help me understand my Mitsubishi Ecodan system By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	In addition to the above you might want to balance out the buffer so it is acting as if not there. Adjust pump speeds for minimum difference in temp between the two flow ports (flow from hp and flow ...
	RE: Ecodan Legionella cycle - immersion heater problem By Transparent, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thanks for letting us know @clockworks I admire your optimism that the thread is now 'closed'. It'll get re-opened at some point...... when someone actually contracts legionnaires disease. There will ...
	RE: Ecodan Legionella cycle - immersion heater problem By Clockworks, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Just to close this. Finally had the installer back last week to fit an immersion thermostat with a higher rating. As expected, no more rapid switching, immersion stays on and water gets up to temper...