Recent Posts

| Forums | Topics

Page 43 / 60 Prev Next

Posts with their shortened content
	RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@bart How you getting on with yours now?
	RE: Air Changes per Hour - ACH and the MCS requirement By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa I love going on the tools, I did it yesterday, the engineers just look at me and smile like I should get back in the van lol. Last year I worked with our HP engineer for 6 months solid, offic...
	RE: Ecodan EMP2 kit - is it any good? By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 They are 2 electric meters that are more accurate than the general data on the melcloud, they also interface with your FTC. I have attached a link to show you all of the options, I have...
	RE: Ecodan EMP2 kit - is it any good? By Mars, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba should know the answer to this...
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Cheap time is 4 to 7am yeah? I have it programmed for 4to 5 for DHW, manually on controller but not happening . As I wait for pcb’s I’ll try it again . could it be something to with FSV settings as th...
	RE: DHW SET UP with Samsung gen 5 By DerekDeLeon, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@alfapat An odd number of available timeslots.....that's hilarious, only in Korea 🤣 🤣 The on time at 0300 is only an hour away from the cosy cheap time at 0400 can't it wait an hour...
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Still not working . I notice in Daily timing for DHW that there only five slots and I am trying to do 3 cosy on and off timings , which should be 6 slots . However the first time I set up the contro...
	Ecodan EMP2 kit - is it any good? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi. I like to monitor the performance of my Ecodan heat pump and use the app MEL-PUMP. However, I understand that energy monitoring data supplied via MEL-CLOUD is not 100% accurate; comments varying f...
	RE: Air Changes per Hour - ACH and the MCS requirement By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba Sounds very interesting. It seems to me that this is an exciting time to be in the renewable heating market as there is going to be lots of innovation and evolution of understanding over...
	RE: Flow Rate & Low Loss Headers By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Houses with reasonably low loss aren't going to require heating once it gets above say 15C because you have a constant 400-600W going into them from waste heat from electricals and the people. Obviou...
	RE: Help me keep the faith with my air source heat pump installation By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	If it's running on WC then at night it's quite likely to heat up. The outdoors gets quite cold at night! Likewise circulator pump is likely to continue running because many heat pumps simply run the...