Recent Posts

| Forums | Topics

Page 30 / 56 Prev Next

Posts with their shortened content
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hey I totally appreciate your help and suggestions , sorry if seems negative . I have reset clock to am/pm , but not sure that’s the problem . I went over daily’s again on the am/pm settings including...
	RE: Ecodan EMP2 kit - is it any good? By ASHP-BOBBA, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Please note: heat meter accuracy at 95+% is as long as it is installed in the correct location, just thought I would add that before someone calls me out on it, I have seen them way out when the meter...
	RE: Ecodan EMP2 kit - is it any good? By ASHP-BOBBA, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 Hi, I think is fairly accurate, somewhere between 75-90% but I think this can vary between a pre-plumbed cylinder and a stand alone system, TBH, I think its more about how well the probe...
	RE: Ecodan EMP2 kit - is it any good? By Richard24738, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba Thanks. From reading the document, it would seem that the packs were to provide accurate information for grants or housing associations rather than for the homeowner looking to monitor the...
	RE: DHW SET UP with Samsung gen 5 By DerekDeLeon, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	[/quote] I am only trying to help based on the info you have previously written. Regarding your suggestion for FSV 3052 , it is just a timer to ensure that the forced DHW setting (expensive) can't...
	RE: Ecodan EMP2 kit - is it any good? By ASHP-BOBBA, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 Hi, I don't actually know if they replace the data or if you get 3 sets of data from the app, Mitsi claim its more accurate but i think what is most important is the meters are MID compl...
	RE: Ecodan EMP2 kit - is it any good? By Richard24738, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba Thank you for your response. Do the meters actually provide new data or simply replace the existing calculated energy consumed data with more accurate data. ie the new data would then be p...
	RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By ASHP-BOBBA, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@bart How you getting on with yours now?
	RE: Air Changes per Hour - ACH and the MCS requirement By ASHP-BOBBA, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa I love going on the tools, I did it yesterday, the engineers just look at me and smile like I should get back in the van lol. Last year I worked with our HP engineer for 6 months solid, offic...
	RE: Ecodan EMP2 kit - is it any good? By ASHP-BOBBA, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 They are 2 electric meters that are more accurate than the general data on the melcloud, they also interface with your FTC. I have attached a link to show you all of the options, I have...
	RE: Ecodan EMP2 kit - is it any good? By Mars, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba should know the answer to this...
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Cheap time is 4 to 7am yeah? I have it programmed for 4to 5 for DHW, manually on controller but not happening . As I wait for pcb’s I’ll try it again . could it be something to with FSV settings as th...