Recent Posts

| Forums | Topics

Page 88 / 165 Prev Next

Posts with their shortened content
	RE: Octopus Cosy Heat Pump Owners & Discussion Thread By Toodles, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@andrewj The power consumption varies between the peaks at switch-on of ~1.7 kW and ‘tickover’ at about ~300 - 400 Watts. I note that today with lower temperatures, the pump is running most of the tim...
	RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters By Toodles, 2 weeks ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@old_scientist Just to say that during our retrofit, we had 7 out of 10 radiators replaced and the system was (if I remember correctly), given a full flush before the old radiators were removed and a ...
	RE: Octopus Cosy Heat Pump Owners & Discussion Thread By AndrewJ, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Interesting, thanks. It looks like yours is operating on/off as well (currently) - I don't see the total power input or a kWh scale. The Cosy yesterday, showing input/output and OAT: Attachment :...
	RE: DHW Efficiency By EGP01, 2 weeks ago Forum Domestic Hot Water & Cylinders
	I have Samsung Gen 7 8kw with Adia. We have a new cylinder so no heat exchanger. Currently averaging 2.75 for DHW for 250 L tank set to 50 degrees. I occasionally run a legionella cycle but only when ...
	RE: Daikin Altherma 3M ASHP and British Gas Hive Home By Toodles, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	We have a Daikin EDLA08 8kW monobloc (DHW is handled separately by a Sunamp Thermino ePC210 unit connected to our MyEnergi Eddi for grid / solar powering). We had the unit connected with the Daikin MM...
	RE: Octopus Cosy Heat Pump Owners & Discussion Thread By Toodles, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@andrewj In case the comparison is worth anything, here is a chart showing the Homely controlled 8 kW Daikin EDLA08 monobloc for the day of 23rd. October. The values are for IAT (set to 22.5 degrees C...
	RE: Samsung Gen 7 R290 Heat Pump: Hot Water Use Seems Very Low - Is That Normal? By WallE, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I have had a Samsung Mono 5kW R290 Gen 7 heat pump installed for my 2 bed 1930s terrace - I'm actually looking for a bit of advice? Over the summer in June it used 10.3Kw total and July 2.2Kw total fo...
	RE: Mixergy Tank Failure By bontwoody, 2 weeks ago Forum Domestic Hot Water & Cylinders
	@old_scientist @jamespa So this was last nights DHW run using economic mode. Im a bit unsure as to what the actual COP was as it states 3.00 for the whole window, but the instanteous values are much l...
	RE: My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus By EGP01, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jords I had very similar experience with heat loss surveys. I ended up having 4 🙄. Particularly noticeable was variation by rooms between them all and also the number of radiator changes and ...
	RE: Melcloud and Havenwise By bontwoody, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@davidalgarve Thanks David
	RE: Melcloud and Havenwise By DavidAlgarve, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	This is the User Manual for the Ecodan to MelCloud interface and you will see it quotes MAC-5571F-E Dated November 2012! The one I have was installed 3-4 years ago and is a MAC- 5871, so probably an u...
	RE: Air to Air Heat Pumps By dgclimatecontrol, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@springswood we install these nationwide and I have them in my own home. they are super efficient (nothing cheaper) and cost effective to purchase. The only disadvantage with the floor units is they a...