Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 55 / 64
Posts with their shortened content
RE: DHW SET UP with Samsung gen 5  

By Alfapat, 4 weeks ago

  @ashp-bobba Many thanks , I contacted Havenwise on my needs as I acted on your thoughts , but they said that I would need to contact Samsung as to what I need to go forward . My Gen 5 can be enable...
RE: DHW SET UP with Samsung gen 5  

By ASHP-BOBBA, 4 weeks ago

  Graham is the master for Samsung, he has a lot of videos on youtube on how to do stuff with Samsung. I am sure you can change the 3am timer and also I am sure you can set multiple timers. I would a...
RE: Air Changes per Hour - ACH and the MCS requirement  

By ASHP-BOBBA, 4 weeks ago

  @jamespa I have not had a heat calc yet that is below 4.9kW so, so far so good for me but I am sure at some point I will do one. will also soon fit a 6kW ASHP to my new house which has 10mm copper tai...
DHW SET UP with Samsung gen 5  

By Alfapat, 4 weeks ago

  Using the timer is more efficient for most people most of the time. [/quote] Thank you OK that was Gen 6. So Iam going to start a new thread as I need some help. I have never had to use the controller...
RE: Air Changes per Hour - ACH and the MCS requirement  

By JamesPa, 4 weeks ago

  It's a good question. With a house that has sufficient heat capacity (eg one with ufh in a slab) batch heating at cheap rate is probably a good approach. It sacrifices efficiency but with cheap rate...
RE: RDSAP10 effect on existing heat pump EPC rating?  

By AF1, 4 weeks ago

  @aaron Great response, thank you. Yes I already knew that Proof of all aspects is the key. I have everything regarding Glazing, GSHP, MVHR, EWI except the cavity fill certificate so I have emailed CIG...
RE: I don't need any heating in the summer. How do I turn my Samsung heat pump off?  

By Alfapat, 4 weeks ago

 
RE: Remaining hot water/hot water flow meter  

By ASHP-BOBBA, 4 weeks ago

  @lakey Hi, I had a quick read through and wanted to see if I can help a little. Most new high gain ASHP cylinders loose very little heat so its worth heating the cylinder 24/7 not on timer, this way t...
RE: RDSAP10 effect on existing heat pump EPC rating?  

By Aaron, 4 weeks ago

  RdSAP 10 represents a significant shift in how EPCs are calculated, particularly for properties with heat pumps. The revised methodology places greater emphasis on carbon emissions and gives more accu...
RE: I don't need any heating in the summer. How do I turn my Samsung heat pump off?  

By Alfapat, 4 weeks ago

  Thank you
RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately!  

By ASHP-BOBBA, 4 weeks ago

  @bart Which county are you in? Kent by any chance? Send what you can and I will try to help. KR
RE: Air Changes per Hour - ACH and the MCS requirement  

By ASHP-BOBBA, 4 weeks ago

  @jamespa Hi James, I never mind these questions as its helps me learn too. I see this a lot, so I think there is currently no market value for them to make a smaller unit than 5kW at the moment, 80% o...
Page 55 / 64

 

 

 

Share:

Join Us!

Latest Posts

Members Online