Recent Posts

| Forums | Topics

Page 46 / 62 Prev Next

Posts with their shortened content
	RE: Ecodan EMP2 kit - is it any good? By ASHP-BOBBA, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 They are 2 electric meters that are more accurate than the general data on the melcloud, they also interface with your FTC. I have attached a link to show you all of the options, I have...
	RE: Ecodan EMP2 kit - is it any good? By Mars, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba should know the answer to this...
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Cheap time is 4 to 7am yeah? I have it programmed for 4to 5 for DHW, manually on controller but not happening . As I wait for pcb’s I’ll try it again . could it be something to with FSV settings as th...
	RE: DHW SET UP with Samsung gen 5 By DerekDeLeon, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@alfapat An odd number of available timeslots.....that's hilarious, only in Korea 🤣 🤣 The on time at 0300 is only an hour away from the cosy cheap time at 0400 can't it wait an hour...
	RE: DHW SET UP with Samsung gen 5 By Alfapat, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Still not working . I notice in Daily timing for DHW that there only five slots and I am trying to do 3 cosy on and off timings , which should be 6 slots . However the first time I set up the contro...
	Ecodan EMP2 kit - is it any good? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi. I like to monitor the performance of my Ecodan heat pump and use the app MEL-PUMP. However, I understand that energy monitoring data supplied via MEL-CLOUD is not 100% accurate; comments varying f...
	RE: Air Changes per Hour - ACH and the MCS requirement By JamesPa, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba Sounds very interesting. It seems to me that this is an exciting time to be in the renewable heating market as there is going to be lots of innovation and evolution of understanding over...
	RE: Flow Rate & Low Loss Headers By JamesPa, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Houses with reasonably low loss aren't going to require heating once it gets above say 15C because you have a constant 400-600W going into them from waste heat from electricals and the people. Obviou...
	RE: Help me keep the faith with my air source heat pump installation By JamesPa, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	If it's running on WC then at night it's quite likely to heat up. The outdoors gets quite cold at night! Likewise circulator pump is likely to continue running because many heat pumps simply run the...
	RE: Help me keep the faith with my air source heat pump installation By AdamK, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@editor nope no heat demand and heat pump is off apart from this 25w aprox of circulation pump. might try turning the HP heating side off on the controller. at the mo its on weather comp with a night ...
	RE: Help me keep the faith with my air source heat pump installation By AgentGeorge, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Definitely. i had heat calcs for my rooms done, a small bedroom was assumed to be an office, so surveyor assumed 21C reqd temp. In operation, this rad warmed this room up quicker than others, and it l...