Signenergy AI Mode - How long does it take to learn a usage pattern?
Not sure how many Sigenergy users we have here but I’m looking for some insight into the AI Mode.
long story but our export tariff is not yet setup so we are currently in a use it or lose it situation with our solar and batteries.
we have an ASHP so when it’s on usage has been fairly high: so far I’ve been running the sig on a manual charge / discharge cycle to match the octopus cosy off peak periods.
the trouble is now spring is here our usage has plummeted and solar has rocketed so much so that I’m regularly seeing the inverter clipping out and our generation being massively limited. I’ve found myself putting the heating on and running dishwashers half full just to try make the use of the solar which would otherwise go to waste.
I think it’s still a couple of weeks or so away before we’re even able to apply to octopus to export let alone the time they take to process it.
I’ve switched to AI mode a couple of days ago but the forecast seems now to assume that we are going to use a lot of electricity so it’s being somewhat conservative with charging up the battery on the mains off peak.
i could of course just turn it back to manual and set it to be much less conservative but then we are at the mercy of a low sun day meaning we run the battery flat.
so what im trying to figure out is how long does the AI mode take to learn a new use pattern?
If I turn off the heating again and go to low summer use pattern how long before the AI mode figures that out and starts to not charge the batteries so much overnight on forecast sunny days?
a week, a month or longer? Anyone know?
Many thanks in advance….
I am definitely interested in this as I am considering a Sigenergy. How is the software integration could you unlearn it as soon as you are connected. We have had panels since January and only just got the thumbs up from Octopus so we wer in teh same boat lots of unnecessary usage just because!!!!
Kind Regards
Si
——————————————————————————
Grant Aerona3 13kW
13 x 435w Solar Panels
Solax 3.5kW Hybrid Inverter
- 22 Forums
- 2,090 Topics
- 46.1 K Posts
- 70 Online
- 3,383 Members
Join Us!
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
@hughf, I think we’ll organise an RHH session at Instal...
By Mars , 12 hours ago
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 14 hours ago
-
RE: Adding battery storage to SolarEdge PV system
That's concerning. I am currently looking again at the...
By JamesPa , 16 hours ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 19 hours ago
-
RE: Commencing on an ASHP Installation Process
@jamespa Your post reminded me of an interesting intera...
By Sheriff Fatman , 21 hours ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
@m1kegibson If you are able to access the service me...
By HarriUp , 23 hours ago
-
RE: When will heat pumps and install prices come down?
... which of course is impossible because the world mov...
By JamesPa , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
What you run the cable through will affect its current ...
By Transparent , 2 days ago
-
I don't know how to enable cooling on Daikin and @major...
By JamesPa , 2 days ago
-
My advice is reject unless they will delete the buffer ...
By JamesPa , 2 days ago
-
RE: Battery storage to run Heat Pump.
I would be surprised if the battery chemistry is going ...
By Transparent , 2 days ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@dowallydrifter OK. I would recommend you read t...
By JamesPa , 3 days ago
-
RE: Solar to power Heat Pump for DHW
Wow, how big is your heat pump that it is pulling 6kW d...
By Old_Scientist , 3 days ago
-
There are DHW tanks with a built in heat pump that take...
By JamesPa , 4 days ago
-
RE: Vaillant AroTherm Plus 7kW
If the thermostat is connected to the call for heat ter...
By JamesPa , 4 days ago
-
RE: Renewables & Heat Pumps in the News
Yes I realise I'm picking this up a week late...... but...
By Transparent , 5 days ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@cathoderay how did you get a script to run for that- d...
By benson , 6 days ago