No two meters are equal!
When I first had my PV panels fitted in July 2022, the ordered Tesla Powerwall was not yet available as stock was short; as I wanted to know how much energy was being produced, I had an Enphase Envoy unit fitted and connected to the Tesla Gateway. I had Enphase data for individual panels (IQ7 microinverters) and the Enphase app provided production figures etc. Once the first Powerwall was installed, I also had the full data provided by the Tesla app - and the two sets of data were ‘similar’ for PV panel production figures. I also have the fitted ‘Import / Export Meter’ as seems to be fitted on every installation I have ever seen.
Last year, I started noticing that there were large discrepancies between the Enphase and Tesla figures for solar production; this seems to have started when an Enphase ‘Metering Error’ was flagged up. At the time, my installers could find no reason for this and requested Enphase investigate, they eventually came back to me saying that Enphase had found a fault and had updated the software then reset the error flag. I then noticed that the discrepancy in readings was nearly double on the Enphase report and have had their engineers here several times to investigate. Finally, the engineer found that a CT clamp that fed impulses to the Envoy unit had been connected around the two cables from the two strings of microinverters; the CT clamp was then clipped on further down the line after the two strings had been combined within the Tesla Gateway and then the data agreed with that of the Tesla app!
Now the two units agree very closely in their data reports, it only remains to know why these figures are noticeably lower than the export figures as shown by the SMETS 1 Smart Meter! I have questioned this difference with my energy provider three times and they assure me that the smart meter is working properly. I am not inclined to enquire further but just accept that there are readings and readings! Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
I have worked on complex instrumentation systems for over 50 years, and the worst thing that any system designer can do is provide two individual monitoring systems providing readings of the same variable. They will undoubtedly give different readings.
@derek-m The man who wears a watch always knows the correct time - the man with two watches is never quite sure. 🙂 Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
- 26 Forums
- 2,131 Topics
- 46.8 K Posts
- 19 Online
- 5,655 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: ASHP heat output monitoring
@tim441 Thanks, PM received and appreciated, I can't ev...
By Carlo , 6 minutes ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
I am keen to see how this unfolds and changes the lands...
By ASHP-BOBBA , 2 hours ago
-
RE: Who has a V2G EV installation
General comment on battery care... I guess if ev is on ...
By Tim441 , 6 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@old_scientist I have never cleaned the mag filter myse...
By Toodles , 6 hours ago
-
@old_scientist like for like comparisons are almost imp...
By Tim441 , 6 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist There is an option in the Tesla app that...
By Toodles , 6 hours ago
-
RE: Mitsu Wireless Controller and MelCloud
On the FTC5 I think this requires the dip switch on the...
By Abernyte , 6 hours ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
@old_scientist me too. Just installed my new heat pump ...
By Eliuccio , 2 days ago
-
RE: Is your heat pump insured?
Yup just spoke to Privilege to inform them of my impend...
By Scalextrix , 2 days ago
-
RE: Forum updates, announcements & issues
Just to keep everyone in the loop, as the site continue...
By Mars , 3 days ago
-
RE: Fast DHW setting on Midea (Clivet) heat pump
@simon-w, is this something you could potentially assis...
By Mars , 3 days ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Fwiw I called my installer out for the first time a few...
By JamesPa , 3 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@sandy, I'll send Vaillant an email tomorrow and see if...
By Mars , 3 days ago
-
RE: Long term efficiency degradation
@jamespa yes as I thought thanks. We have a reaso...
By Scalextrix , 4 days ago
-
RE: Sunamp Thermino Heat Battery
@jamespa A few days after the installation had been com...
By Toodles , 4 days ago
-
RE: Planning Permission May 2025
Fair enough. I have read the legislation and MCS020a ...
By JamesPa , 6 days ago
-
RE: How do I choose a single room MVHR to prevent losing heat in my bathroom ?
An update on the Heatsava. It is the most difficult thi...
By heat-pump-newbie , 6 days ago
-
RE: Renewables & Heat Pumps in the News
this document extensively describes (in a non-blame, ne...
By Judith , 1 week ago
-
RE: Ecodan - Legionella Operation Time and Target Temperature
Once the white plastic cap is removed, my immersion loo...
By Old_Scientist , 1 week ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@dgclimatecontrol I don't know, but they were not happy...
By DavidAlgarve , 1 week ago