Tips on How to Get Your Home Ready for Winter to Lower Bills
I received this list of tips to get your home ready for the winter to lower your bills written by Graham Lock from Art Windows & Doors, a double-glazing specialist based in Glasgow. Tip 2 is an interesting one.
While we may be in the midst of a heatwave, there are only a few months until winter hits, with the season likely to bring freezing conditions. So- if you haven’t winterised your property, now is an excellent time to do so! Taking these actions will protect your family from the elements, and a properly insulated home can be a great tool to lower your heating costs during the Cost of Living crisis - while adding significant value to your home!
1. Insulate the Property
“Heat is easily lost from your home if you fail to insulate the property adequately. Various areas of the property are prone to heat loss. These can include exterior walls, the roof, doors and windows. Loft insulation is a good place to start, by adding a fleecy base layer and preventing rising heat from evaporating into the atmosphere. Cavity wall insulation is another area to consider, as this area will prevent heat from billowing out of the side of the home. Lag heating pipes to prevent them from freezing during periods of extreme temperatures. These examples of basic insulation will make a huge difference to the heat levels within your home.”
2. Get a New Boiler
“Old and dated boilers are unreliable, expensive to run and prone to breakdowns over the winter months. Fit an A-rated boiler though and not only will this run with greater efficiency over the winter months, it’ll be less temperamental and it could reduce your winter fuel bill by anywhere up to 25%”
3. Have your Central Heating Serviced
“Take care of your central heating now and this should prevent any potential problems as the winter embraces your home. Getting your boiler serviced isn’t a bad idea, you might want to power flush your radiators or give them a bleed, to remove air from the system and reduce the chances of cold spots. Have a heating service now and you reduce the chances of it breaking down as temperatures drop outside.”
4. Update Windows and Doors
“Poorly fitting doors and weather-worn windows are another cause of heat loss within the home. Draughty, single-glazed windows are some of the worst culprits as they offer very little in the way of insulation. Double and triple-glazed options are best. They add a protective barrier as do snug-fitting UPVC or composite doors. Fit them and your home benefits from high levels of thermal efficiency.”
5. Window insulation film
“Window insulation film is easy to find in any hardware store or online. The kits include a plastic shrink film to apply to the indoor window frame with double-sided tape before you heat it with a hair dryer to remove any wrinkles and shrink the film. It’s a cheap and effective method, but your windows will have a cloudy and shrink-wrapped look.”
6. Rubber weather sealing
“Like insulation film, rubber weather sealing is easy to buy online or in hardware stores. All you need to do is cut long strips to fit the dimensions of your windows and then peel and stick the sealing to the frame to close any gaps, eliminating drafts. Rubber sealing is a cheap and effective solution that has a minimal impact on the look of your windows. You can, however, potentially damage paint or leave a sticky residue when removing the seal.”
7. Draft snakes
“Draft snakes are simply fabric tubes that you place under a window sill or door to prevent drafts. You can buy them in a variety of great designs, or you can make your own to fit your windows by sewing a tube of fabric and filling it with dry rice. Whilst this offers you a cheap and easy crafting project, it only prevents a draft from coming from the window sill, still letting out plenty of heating through the rest of the frame and the window itself.”
8. Cellular shades or blinds
“If you want natural light in your home whilst receiving insulation, you may wish to try cellular shades. You can order them to custom-fit your windows in the home and design shops. You can also have them made for doorways. The only problem is that they don’t insulate as well as other options, such as curtains.”
9. Layered curtains
“Using multiple heavy fabrics can provide a decent amount of insulation for your windows. However, you will end up blocking out the majority of natural light. Layering curtains can make your living room interior design look amazing, but you will not be able to see it due to the lack of light. Buying heavy curtains to layer is quite expensive, too. The best investment you can make this winter to save on your heating costs is a new set of windows.”
Pre-order: The Ultimate Guide to Heat Pumps
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Posted by: @heat-pump-newbieHi @editor @derek-m Have you heard of Q-bot ? It's a little robotic car that drives round under the surface of a suspended timber floor and sprays insulation foam up onto it ! Sounds very cute but is it any good ?
Hi Newbie,
I would assume that it could be quite good if it is applied correctly. 😀
Do you have any idea how much it costs?
I have been trying to convince my wife that she needs to go on an extreme diet, so that she can crawl under the floor to improve the insulation. 😎
Of course I would do so myself, but I suffer from having 'big bones'. 🙄
I have more info: the price for insulating the timber floored part of a bungalow (which I'm estimating would be about 60 m sq) is in the region of £5000 - £6000. This would be with minimal disruption and hopefully zero damage to the existing varnished floorboards. To manually lift, insulate under and replace those floorboards, with possible damage etc the estimate would be at least twice that.
Any thoughts ?
If that is the actual cost I wonder how they arrive at such a price. A further concern would be if they can avoid spraying any electrical wiring that may be present, since if it is covered with insulation it could overheat if a high current is drawn.
Looks like I will have to encourage my wife to diet harder. 🙄
This does look pretty cool, @heat-pump-newbie, especially for those with suspended floors.
I’d still love to have something that could navigate behind the plasterboard and see which areas need to get the insulation bolstered.
Pre-order: The Ultimate Guide to Heat Pumps
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Posted by: @editorThis does look pretty cool, @heat-pump-newbie, especially for those with suspended floors.
I’d still love to have something that could navigate behind the plasterboard and see which areas need to get the insulation bolstered.
Hi Mars,
Have you thought of hiring an endoscopic camera?
@derek-m, I haven’t. But it’s a good idea, provided I can find strategic spots to get the camera in.
Pre-order: The Ultimate Guide to Heat Pumps
Subscribe and follow our Homeowners’ Q&A heat pump podcast
I got myself a Seek thermal imaging attachment for my iphone in the hope that I'll be able to see any voids in the cavity wall insulation. But it's not been cold enough to test it yet (thankfully).
Posted by: @heat-pump-newbieI got myself a Seek thermal imaging attachment for my iphone in the hope that I'll be able to see any voids in the cavity wall insulation. But it's not been cold enough to test it yet (thankfully).
Mars,
Did you try your thermal camera on the walls in question?
Posted by: @derek-mPosted by: @heat-pump-newbieHi @editor @derek-m Have you heard of Q-bot ? It's a little robotic car that drives round under the surface of a suspended timber floor and sprays insulation foam up onto it ! Sounds very cute but is it any good ?
...
I have been trying to convince my wife that she needs to go on an extreme diet, so that she can crawl under the floor to improve the insulation. 😎
...
And you're still married and in possession of all your body parts?
105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs
"Semper in excretia; sumus solum profundum variat"
- 26 Forums
- 2,129 Topics
- 46.7 K Posts
- 21 Online
- 5,651 Members
Podcast Picks
Latest Posts
-
@old_scientist Quarterly updates would be much apprecia...
By Toodles , 30 seconds ago
-
RE: Who's your electricity provider and what's your tariff?
Having perused the ‘net, I see that the capacity at 10 ...
By Toodles , 5 minutes ago
-
RE: Forum updates, announcements & issues
Just to keep everyone in the loop, as the site continue...
By Mars , 8 hours ago
-
RE: Fast DHW setting on Midea (Clivet) heat pump
@simon-w, is this something you could potentially assis...
By Mars , 18 hours ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Fwiw I called my installer out for the first time a few...
By JamesPa , 24 hours ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@sandy, I'll send Vaillant an email tomorrow and see if...
By Mars , 1 day ago
-
RE: Long term efficiency degradation
@jamespa yes as I thought thanks. We have a reaso...
By Scalextrix , 1 day ago
-
RE: Who has a V2G EV installation
I agree, but a word of caution. V2X is also sometimes u...
By Majordennisbloodnok , 2 days ago
-
RE: Sunamp Thermino Heat Battery
@jamespa A few days after the installation had been com...
By Toodles , 2 days ago
-
RE: Is your heat pump insured?
My home insurance renewal is due soon meaning I am doin...
By cathodeRay , 4 days ago
-
RE: Planning Permission May 2025
Fair enough. I have read the legislation and MCS020a ...
By JamesPa , 4 days ago
-
RE: How do I choose a single room MVHR to prevent losing heat in my bathroom ?
An update on the Heatsava. It is the most difficult thi...
By heat-pump-newbie , 4 days ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
I've certainly seen that on their Ts & Cs page but ...
By Majordennisbloodnok , 5 days ago
-
RE: ASHP heat output monitoring
@carlo - not much better, is it. It looks more like a u...
By cathodeRay , 5 days ago
-
RE: Renewables & Heat Pumps in the News
this document extensively describes (in a non-blame, ne...
By Judith , 5 days ago
-
RE: Ecodan - Legionella Operation Time and Target Temperature
Once the white plastic cap is removed, my immersion loo...
By Old_Scientist , 6 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@dgclimatecontrol I don't know, but they were not happy...
By DavidAlgarve , 6 days ago
-
RE: Why do we need pressurised systems?
A good question @toodles. My old open thermal store and...
By AllyFish , 6 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
Cross references for @martingale Background discussi...
By Transparent , 7 days ago
-
@ecobaker May I ask a question of you please. I too hav...
By Papahuhu , 7 days ago