Last seen: Feb 13, 2024
Depends on the CoP, for me, based on my tariff[s] I need to get above 3.4 right now to be cheaper than oil. Hence the need to get the installs done p...
Ultimately this will come down to the efficiency you can get out of the heat pump. Assuming a SCOP for a heat pump installed properly being round 3.7...
If someone has an oil boiler that does not need electricity and is thus exempt from the standing charge let me know 😀. I excluded it as this is a tax...
This should give you an idea. I think if you get a CoP of 3.9 or higher you are cheaper than oil, though depends on your price of electricity. ...
@lfranklin Crumbs, 12 is a bit cold for inside, esp if working from home. I found the following on this site but I can't find the information where ...
Where is your wired remote control unit located. If this is in an unheated space, this could be contributing to the problem. I see it was showing 12...
Your charts are only measuring electricity, how do you know how much of that is going to your heat pump? The timing of the spikes suggest a DHW rech...
That is your flow temperature, and seems quite high. The legionella heating cycle should only be once per week (or as you set it, mine is set to onc...
This is "point in time", but only when the outside temperature is -2.2 degC. This is the design temperature for your house. MCS Standard MIS 3005, r...
Awesome piece of work, especially from [what I think was] a standing start. Impressive CoP.
@derekdeleon I have the 16kW Samsung Gen6. As I was going to reuse my vented indirect solar thermal store, so I put in a heat exchanger for the hot...
I see the same with "Indoor Temperature" and "Target Indoor Temperature" when you are on external thermostat.
- 26 Forums
- 2,171 Topics
- 47.8 K Posts
- 54 Online
- 5,744 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Big Changes Coming to Our Heat Pump System
@editor your engineer's attitude is truly horrifying. ...
By GrahamF , 14 hours ago
-
@cliffhanger - seriously though, I have no idea. What I...
By cathodeRay , 16 hours ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 16 hours ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 17 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 21 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 23 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 24 hours ago
-
@jamespa Ours is a Daikin EDLA03 8 kW and the Delta T =...
By Toodles , 1 day ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 2 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 2 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 2 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 2 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 3 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 3 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 3 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 3 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 5 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 5 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 6 days ago