Last seen: Jan 24, 2023
We are seeing very similar behaviour with our flow temps. After a couple of weeks of nice sunny days here it has now become colder and cloudier, so ...
So, ran our system in Room Temperature mode for a week or so, and monitored flow temperatures. I came to the conclusion that it doesn't work very wel...
@alec-morrow sorry for the slightly delayed response - just been fighting off Covid! I'm a little unsure about what you mean. Would mixers enable e...
@kev-m Yes, it is the Mitsubishi wireless controller that I am using. You raise an interesting point because obviously there is no way to have tw...
@kev-m A quick update. After thinking about the problem for a little while and re-reading the manual I came up with really simple solution - swap th...
@kev-m Thanks for that information, it confirms what I thought was happening. I'm not going to write off Room Adaptation just yet, but may have t...
@alec-morrow FTC is the Mitsubishi Flow Temperature Controller The ASHP was retrofitted so the UFH uses controller and stats from Uponor as origin...
I found that when taking images outside it was better to go closer so that there was no sky in the frame. The sky shows as a lot colder than the hous...
@skd @SuzeR We also have an 11.2kW Ecodan. Generally very quiet except when the ambient drops. We only have one internal pump (something I am stil...
Our towel rails are in the same circuit as the upstairs radiators, so only get warm when the heating is on, with one exception. The ensuite in our ma...
I understand what you're saying, but it's not just that the guy who came yesterday thinks it is sub-optimal, it is actually wrong. Continuing to run ...
- 26 Forums
- 2,228 Topics
- 49.5 K Posts
- 496 Online
- 5,890 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: How good is the app support for your heat pump?
Not yet. We’ve been approached by several brands, and w...
By Mars , 4 minutes ago
-
RE: Renewables & Heat Pumps in the News
An interesting partnership between Octopus Energy and L...
By Mars , 9 minutes ago
-
RE: Electricity price predictions
@jeff Many questions. We all know it is now a quickl...
By Batpred , 25 minutes ago
-
RE: Help me keep the faith with my air source heat pump installation
My single Mitsubishi ilife2, which is otherwise perfect...
By JamesPa , 48 minutes ago
-
RE: Rate the quality of your heat pump design and installation
Octopus - Daikin Altherma 3M 4KW heat pump install - Ap...
By bimbleuk , 51 minutes ago
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
@bubuontheweb thanks for the update. There are a lot lu...
By Mars , 1 hour ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@lucia, I appreciate the feedback, and we’ve received a...
By Mars , 1 hour ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
I hope out of all of this that I can run the system at ...
By Crimson , 1 hour ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Daikin Altherma 3M - 4kW (R32 2022 Release) (EDLA04E2V3...
By bimbleuk , 2 hours ago
-
RE: Twin 10kw Grant Aerona Volumiser Tanks using lots of power
The Grant Aerona3 external volumisers are insulated uni...
By Grantmethestrength , 11 hours ago
-
RE: Replacing knackered oil boiler with ASHP - Perthshire
Where to start? In brief we are happy with the system...
By DowallyDrifter , 12 hours ago
-
Question about Heating Pump Operation mode – Ecodan FTC6 v20.06
I have a Mitsubishi Ecodan EHST20D-YM9D with PUHZ-SWM80...
By Johj45 , 13 hours ago
-
RE: How to increase DHW water temperature on Samsung Gen 6 Control Panel
Im just in the process of connecting up my mixergy cyli...
By bontwoody , 20 hours ago
-
Unless anyone can tell me differently, there appears to...
By DowallyDrifter , 23 hours ago
-
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?
I run my Vaillant on either expanded mode (either end o...
By JamesPa , 1 day ago
-
-
RE: New Fogstar 15.5kWh upright solution
From my experience with inverters from different Far Ea...
By Transparent , 2 days ago
-
@bontwoody Thank goodness you are ‘back on-line’ so to ...
By Toodles , 2 days ago
-
RE: Automation options to maximuse efficiency & ToU tariffs
@majordennisbloodnok Seems reasonable. It would be m...
By Batpred , 2 days ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@hcas OK Thanks. Will do.
By bontwoody , 2 days ago