Activity
 
Notifications
Clear all
Mike H
@mike-h
Member
Reputable Member
1060 kWhs
Joined: Dec 1, 2021
Last seen: Apr 16, 2024
Topics: 5 / Replies: 108
Reply
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?

@toodles Yes, there should be - there is the required 600mm distance from the wall.

7 days ago
Reply
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?

@kenbone Thanks Ken, that is really helpful. With some trepidation, could I point out an inconsistency in your guide? On page 12 FSV 2091 External T...

7 days ago
Reply
RE: Is this a bad installation and is there something wrong with my Samsung heat pump?

@ken-bone Thanks so much for such a clear explanation of the positioning of one or more anti freeze valves. I was planning to have one installed in my...

1 week ago
Reply
RE: Samsung Gen 6 Issues with outlet temp

I think you are quite correct as long as the extra volume is in your radiators. The more emitters that you have, the more heat will be emitted, which...

4 weeks ago
Reply
RE: Samsung Gen 6 Issues with outlet temp

@editor This advice seems to fly in the face of everything I have learnt from the likes of @iancalderbank and @heacol . Perhaps that is why you have a...

4 weeks ago
Reply
RE: Samsung Gen 6 Issues with outlet temp

As Mars says, the Samsung will cycle when the heat emitted by the radiators is lower than the minimum power that the heat pump can modulate down to - ...

1 month ago
Reply
RE: Rate the quality of your heat pump design and installation

Hi Ian, yes you are mistaken. The water volume in the primary loop with a heat exchanger is always going to be small. This a quote from Graham Hendra'...

2 months ago
Reply
RE: Rate the quality of your heat pump design and installation

You have what is sometimes referred to as flow separation. In your case this is done using a heat exchanger and in most other Samsung systems that I k...

2 months ago
Reply
RE: Rate the quality of your heat pump design and installation

@iantelescope You should see Set indoor and this is adjustable. However weather compensation still operates just as it did when using an external s...

2 months ago
Reply
RE: Rate the quality of your heat pump design and installation

This is incorrect. This setting allows you to use the thermostat in the wired controller and set up room temperature mode. The water law settings stil...

2 months ago
Reply
RE: Are antifreeze valves essential for a glycol free ASHP system?

@allyfish What is the rationale for your requirement to fit anti-freeze valves on both supply and return pipes? This is contrary to what @heacol recom...

2 months ago
Reply
RE: Are antifreeze valves essential for a glycol free ASHP system?

@heacol Thanks Brendon, that is very helpful.

2 months ago
Page 1 / 10
Share:

Join Us!

Latest Posts

x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security