Last seen: Dec 1, 2022
@justinsb, @kev-m I've just realised what is happening here. This display is showing you what the flow temp will be at any given outside temp. So ...
Whenever I try to download the CSV data it totally ignores the date ranges specified and always gives me the first 3 months or data. Are you able to d...
@kev-m What software are you using to collect this data and generate these charts?
I have a 250l tank, set to 50ºC with a 5º drop to reheat setting. Two of us in the house. On average it seems to use about 2kWh per day. Where is th...
Morning, after setting up the curve with you and turning all thermostats up to 30ºC I saw the internal temp beginning to rise so I notched it down to...
(@kev-m) could you also tell us how you are generating the non MelCould chart? Thanks.
Apparently the curve preview button does display the correct settings. 50ºc @ -5 and 20ºC @ 20ºC looks like this
@justinsb Just out of interest, on the screen where you can preview or adjust your curve, if you press the preview button F3 what curve settings...
Feel the fear! 😉 Select Yes to system shutdown, then follow Dereks notes. You will see a screen like this: When you are finished just keep pres...
Skype is good. I'll send you a direct message with my username.
Hi @derek-m. How would you like to go about us setting up my compensation curve?
Outside temps for each of the testing days. 19/01 - 24/10 02/11 - 07/11
Latest Posts
-
RE: Ecodan consuming 100kwh per day in new build!!!
Well at least that solves the mystery of where the exce...
By JamesPa , 53 minutes ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 1 hour ago
-
RE: Plug and play solar. Thoughts?
And we have it: DESNZ are now investigating the feasi...
By Lucia , 4 hours ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 17 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 1 day ago
-
@heacol, if you're around, can you please provide some ...
By Mars , 1 day ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 1 day ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 2 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 2 days ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 2 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 2 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 3 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 3 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 4 days ago
