Last seen: Jan 8, 2025
Maybe something to do with it?
@Prunus, I don't know about flow and buffer tanks but I think the minimum output depends on the same conditions that affect the COP. If the COP is hi...
so am I and I don't think so...
@rv3, at the moment I don't know if my COP has improved as my controller has stopped recording energy produced. However, I'm heating my whole house...
Sort of. Melcloud seems to be a bit s^!t at getting data out. This is one of the traces you can get. The red line (unhelpfully) is, I think, return...
Brendan, this is part of last night. What I think is happening is that there isn't quite enough load to enable the ASHP to run constantly. I assume...
You don't know Mrs M. She doesn't need a thermometer! I'll maybe try and see what happens...
Ours is about 160m2. Detached bungalow.
Update, 12.1kW used 11/11/21. House temp still 21-22C. No change, weather looks similar for the next few days.
@batalto, ah I see; you're recording all power, not just the ASHP
@heacol, Brendan, A couple of questions. What would you consider to be short cycling as opposed to acceptable? Also, is installing a tank on the f...
@batalto, The overnight peaks are very similar to mine. What's the peak between 6 and 9? HW or the curve being moved?
- 26 Forums
- 2,136 Topics
- 46.8 K Posts
- 14 Online
- 5,662 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Mitsu Wireless Controller and MelCloud
@robs Hi Rob, At the end of a note to Mitsu UK, thank...
By DavidAlgarve , 1 hour ago
-
Yes - I had my eye on a Tesla charger just N of Norwich...
By downfield , 2 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
@jamespa our tanks dated back to at least 1999 when we ...
By GrahamF , 2 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
What limit are you speaking of. So far I was aware dno...
By JamesPa , 11 hours ago
-
RE: Why so many sigenergi installer recommendations?
@adamk Tesla is a great option, it’s also one we instal...
By SAEnergy , 13 hours ago
-
RE: Rodents! A word of warning for heat pump owners
Hradline in Telegraph: Brace for plague of rats after s...
By Tim441 , 17 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
As a potential heat pump customer, it would be good to ...
By Temperature_Gradient , 20 hours ago
-
RE: Octopus replacing the fixed 15p/kWh export rate with a market tracking one
@trbob I have just extracted the details for Agile Expo...
By Toodles , 1 day ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
The Ultimate Guide to Heat Pumps is less than a month a...
By Mars , 1 day ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 2 days ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 2 days ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I estimated our usage on the following basis. The mos...
By Old_Scientist , 2 days ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 3 days ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 3 days ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 4 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 4 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 5 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 6 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 6 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 1 week ago