Last seen: Jan 8, 2025
We now have a few people doing some modelling and experiments on setback for an ASHP. IMO modelling a real ASHP in real conditions is quite difficult...
I'll PM you the spreadsheet.
I can’t compete with the detail, complexity and (I hope) the 40 plus page discussion of the previous analysis but this is my attempt at answering @cat...
One of the nagging doubts in my mind is @cathoderay's previous difficulty in reconciling his estimated delivered energy with his previous oil consumpt...
Even if you are using fixed flow, it should still take more energy to heat your house if it's colder outside. This video explains the different he...
@afarmery You can't programme in changes to the WC settings unfortunately. You either use stats or have the timer switch it off. I've used externa...
I hadn't looked at this before but I did and this is what mine does. This was one of mine in October. I don't know if the immersion is used; I didn't...
Let the forum know what they say if you do. I asked the question on a Mitsubishi Facebook group and that's the answer I got - it might not be correct!
I've remembered something that may explain it; some FTC6s were supplied without the energy delivered functionality. I don't know if it was hardware o...
No you did make yourself clear, it was me! Apologies, the little house symbol isn't there when on WC. If you switch to room temp control on the main ...
@hotheat have you been able to get the consumed/delivered data from the main controller? It's accessed using the far right of the four buttons. The...
Latest Posts
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
@terry1812 Yes, I use Homely, as to whether Daikin is u...
By Toodles , 6 hours ago
-
RE: ASHP heat output monitoring
@carlo - welcome to the forum. I don't know about LG...
By cathodeRay , 11 hours ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 15 hours ago
-
OK... I'm here. But the amount of my time needed to add...
By Transparent , 17 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 22 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 1 day ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 1 day ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 2 days ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 2 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 3 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 3 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 3 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 3 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 4 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 4 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 4 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 5 days ago
