Last seen: Jan 8, 2025
It uses the csv file downloaded from my MMSP monitoring. It's done in python/github and runs on my laptop. It logs into Melcloud, calls the csv file ...
I'm sure your setback is saving money. You don't lose too much heat overnight and it recovers quite quickly. Why do you increase the temp in two pha...
They will; it's in the contract: Applications submitted before 1 April 2016 have their tariffs adjusted in line with the Retail Price Index (RPI). ...
The point with an ASHP or GSHP is that the extra energy you get is free. So with a COP of 3, you put 1kW (or a bit more in reality) and get 2 for not...
Maybe we need to go back a step. You have a 60m2 new(-ish) built space with ufh and a 8.5kW Ecodan. It's using about 30kWh per day in winter to 'heat...
Room Temperature and Auto Adaptation are indeed the same animal. 😎 There are 3 heating modes• Heating room temp. (Auto adaptation)• Heating flow te...
What I was getting at was more trying to find out the logic behind the decisions taken by the ASHP when to start and stop and, in the case of Mitsubis...
They should only get as hot as the WC target if you're on WC. If you're in AA they will get a lot hotter than that.
Not at all, sometimes only I know what I'm thinking and need to explain better! I think we're all doing a great job with one hand tied behind our ba...
Hmm, when I first tried AA, it put the flow up to 53 right away and the WC maximum is 43. I've since limited it to 48 (which definitely works). If y...
I know but it depends what you want to compare. I was trying to answer @cathoderay's question, which (I think) was whether a boost on its own would w...
@derek-m I'll give that a try.
Latest Posts
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
It took me more than a few goes as well, plus some help...
By cathodeRay , 30 minutes ago
-
RE: Surface mount or bury primaries?
I think I would be wary of attaching my services to a n...
By Abernyte , 41 minutes ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@ashp-bobba thank you, and equally so, thank you for ta...
By Mars , 11 hours ago
-
@judith good to know… I’ll continue to feed Wattson, an...
By Mars , 22 hours ago
-
RE: Vaillant AroTherm Plus 7kW
@jamespa I have a hydronic baseboard heater in the kitc...
By Scalextrix , 1 day ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
@editor great article re accreditation. I note ISO/IEC ...
By Bart , 2 days ago
-
RE: Renewables & Heat Pumps in the News
Here’s a little more technical detail/p>
By Judith , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
I don't (yet), but my PW3 is due to be installed shortl...
By Old_Scientist , 2 days ago
-
RE: MCS and NAPIT complaints process
@chrislay, is your heat pump complaint still unresolved...
By Mars , 2 days ago
-
RE: ASHP Install from hell - help please
@saf1973 I’ve been going through old cases on the forum...
By Mars , 2 days ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@aaron There's the rub, the database does not list my ...
By AF1 , 3 days ago
-
RE: Commencing on an ASHP Installation Process
Yes, it's "doable" if everything goes to plan, they arr...
By Old_Scientist , 4 days ago
-
RE: How not to install a heat pump
You are right. Thinking on this has evolved over the p...
By JamesPa , 5 days ago
-
RE: DHW SET UP with Samsung gen 5
Thats good news indeed, you are very likely almost ther...
By JamesPa , 5 days ago
-
RE: Plate heat exchanger considerations
As far as I can tell my vented system would have a peak...
By Scalextrix , 5 days ago
-
RE: Air Changes per Hour - ACH and the MCS requirement
There have been a few discussions dotted around (e.g. I...
By Declan90 , 5 days ago
