Last seen: Jan 3, 2024
@jamespa which if you read my comments, I also suggested this.
@jamespa we get over 15% efficiency gain without a buffer. I've commented on this thread a number of time, if you continue to believe the dinosaur h...
Sound like your have a TPI third party controller on the system.
What control do you have on the system. Make and model pls
@derek-m Interesting reading your post I have a few comments. Because us engineers have carry out a full heat loss (instead of over size guessin...
@william1066 im still running fixed speed pump on open loop system/samsung, very happy with the results.
@iantelescope run the system open loop, adjust the curve settings down so you are not overshooting in comfort temperature. Most systems I install, ...
@timatheronwood sounds undersized, or short of refrigerant. Or could be poor design. Most of the Daikin engineers don't really know about heating desi...
@william1066 after installing our first Mixergy a few years back, I was unimpressed. Since then we have installed/converted older invented cylinders...
I have had the pleasure in working with clients who believed in my proposed setup, (which is not new). So the system consisted of heat pump and syst...
As @heacol says, some of us already have been installing low temp, heat pump ready systems for years. I have put design and efficiency over the so ...
@heacol you sound so like me.
Latest Posts
-
RE: Ecodan consuming 100kwh per day in new build!!!
From what you say about the radiators upstairs it does ...
By JamesPa , 3 hours ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer pleased you found it!
By JamesPa , 4 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 5 hours ago
-
@heacol, if you're around, can you please provide some ...
By Mars , 8 hours ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 9 hours ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 22 hours ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 22 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 1 day ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 1 day ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 2 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 2 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 2 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 4 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 4 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 4 days ago
