Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jun 10, 2026
Thanks @mike-h that explains it. I thought I must be missing a setting somewhere. I did find the hysteresis settings and changed the heating from 0.5 ...
@bontwoody Does your Samsung wired controller switch the heating off when it gets to the set temperature or does it go quite a bit over temperature, o...
We've been on Agile for a few years now. It's always expensive this time of year but as an overall average it works out OK for us. We don't have batte...
I'm new to heat pumps and have only been experimenting with mine for a few weeks but I think that how efficient my Gen 6 Samsung is with low temperatu...
@toodles I have been trying different temperatures and trying to get a balance between comfort and efficiency, but haven't got there yet! I commente...
I have a Samsung unit in a new build house and it seems to use more energy if I run it really low and slow. When it first went in, only about a month ...
@bontwoody From what I have read Homely gives limited monitoring to the end user but it does make things simple and is supposed to be making lots of a...
You've got the right EV for that. I've emailed the installers today with a list of things I have changed, mentioned changing from 2 pumps to 1 P...
@bontwoody thanks again for your input and the link to the OEM forum. I'm now running off the Samsung controller not the third party thermostat. It wa...
I'll find out if it should have been a red flag, but it was an offer for signing up in December and I inquired about it with only 2 days left before t...
@bontwoody Thanks, I hope you have a lovely evening.
@bontwoody Thanks for your posts, and the link to your blog. a very interesting project you have there. I have tried different speeds on my pumps bu...
SPONSORS
Degrees of Separation
Latest Posts
-
@jamespa Also this coming winter I am going to run my c...
By kilgorexv , 8 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 11 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 11 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 19 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 20 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 22 hours ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 1 day ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 5 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 6 days ago
SPONSORS
