Last seen: Aug 25, 2025
Thats definitely true. There is a good reason however, its very difficult to do meaningful experiments and/or draw sound conclusions from the experim...
Glad its warmer and more particularly more consistent. Be careful about concluding its costing more though, the last few days were quite a lot colder...
I think the fundamentals are this: NR clamps performance at a particular level. So most of the time it will make no difference. When its cold enou...
Can I first echo what @transparent says above. This stuff is on one level straightforward, but at the same time not easy until you have been studying...
I do agree entirely that there is an oversizing problem, that design for the midrange operation is important, and that this needs to be fixed. There...
Why do you want to increase your deltaT?
Why, sorry but this is not logical so far as I can see.
I think the answer to this is because we, as consumers, arent prepared to pay for installers to revisit properties multiple times to optimise the set ...
That can and does happen and its a good thing! The tank will be stratified, meaning it will be hotter at the top than the bottom (because hot water r...
Thanks. Im guessing the same. I am not a Samusng expert (or indeed a heat pump expert) but Im hoping the changes needed, to get it running open loop...
@heacol Thanks for the info on pumps and head (Im presuming when you say pumps in parallel you also include in series - as here); with that and the me...
Latest Posts
-
RE: Rodents! A word of warning for heat pump owners
Hradline in Telegraph: Brace for plague of rats after s...
By Tim441 , 4 hours ago
-
What crazy nonsense are inverter limits and why are they imposed?
I’ve recently found out a DNO can impose an inverter li...
By AdamK , 5 hours ago
-
RE: Why so many sigenergi installer recommendations?
@saenergy for me I feel the powerwall gives me for flex...
By AdamK , 5 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
As a potential heat pump customer, it would be good to ...
By Temperature_Gradient , 6 hours ago
-
A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
I felt it would be helpful to share some lessons about ...
By GrahamF , 7 hours ago
-
RE: Mitsu Wireless Controller and MelCloud
Hi David We have an FTC7 but the settings seem to be ...
By RobS , 12 hours ago
-
RE: Octopus replacing the fixed 15p/kWh export rate with a market tracking one
@trbob I have just extracted the details for Agile Expo...
By Toodles , 13 hours ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
The Ultimate Guide to Heat Pumps is less than a month a...
By Mars , 14 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 1 day ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 1 day ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I estimated our usage on the following basis. The mos...
By Old_Scientist , 2 days ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 2 days ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 3 days ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 4 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 4 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 5 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 6 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 6 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 7 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 7 days ago
