Last seen: Nov 19, 2023
This thread has some detailed conversations around the Ecodan's AA mode so thought I'd add some detail around a recent test in AA mode here. I'm not...
Here's another 'feature' of Melcloud I've come across. Below was taken around 10am this morning (i.e. 14th Feb had 'finished' some 10 hours prior). ...
From my perspective I'd done a fairly significant amount of research so was already fairly familiar with the controller settings and how to run things...
@sunandair that's spooky, I also settled on the 10 -7 +3 combo for the exact same logic/reasons. Also see my previous post with the charts with comp...
I noticed something on the chart I posted yesterday (with the frequency values added - below) that got me thinking. I noticed that the compressor freq...
Yes, blue setpoint, black current room temp. Display is +/- 0.5C. 1 degree nighttime setback from 18C to 17C at 23:00, then at 05:00 back to 18C.
Room temp at the time of sampling (12:00) was perfectly at set temp of 18c. I must say that AA mode is good at hitting it's target and holding it to w...
I'm back to the default of 10. Having tried 20, 30, 40 and 60 with no apparent change in behaviour.
I believe so. Code 016 in the service manual.
I thought I'd plot compressor frequency on a typical AA cycle to try and understand what's going on under the hood (rather annoying that frequency isn...
I see the same pattern when my HP is off and the water circulation pumps stay on. Essentially the flow and return water mix until they match temps, an...
Agreed. I've settled on +3 largely for that reason, the comfort factor. At +5 I could almost 'feel' a +5 overshoot (some rooms feeling a tad warm). I ...
Latest Posts
-
RE: Ecodan consuming 100kwh per day in new build!!!
@anca1808 I have just reviewed the whole thread. In s...
By JamesPa , 1 hour ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 12 hours ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 12 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 19 hours ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 1 day ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 1 day ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 2 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 2 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 4 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 4 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 5 days ago
