Last seen: Jul 21, 2024
@djbuzz-07 Sunsynk Are you using lithium/ CAN protocol? If so, mine always starts grid charge @10% It is a setting on the inverter. Can...
Been quite a while since any update - but that's how long it's has taken to get to the root of the issue. Fogstar has owned up and finally ackno...
@robl I've added the screens. Li-Bms screen is accurate. Sunsynk screen shows a +0.3V difference between it and battery. Also shows voltage s...
@robl Ill take a photo of the screen tonight & also in AGMV mode - From memory, it is set to 56.7V - Unless i factory reset/run it in AGMV ...
@chickenbig Sunsynk support claims that Pylontech is not supported. Tho the BMS screen on the inverter is properly populated with the correct...
SITREP #5 No improvement on the system. Everyday, it is charging 1% less. Today was 84% then stopped charging. User timer set to 100%SOC. I'm ...
@misterb @vaugi OK, I'll contacted Fogstar Were I fall down that it is the battery - is that when the Sunsynk is factory reset - it charg...
@misterb @robl SITREP #4? Blimey, what haven't I tried Voltage mode, wasn't working very well. It's a bad SOC replacement. I tried every single...
Interesting review. Good timing for myself. Will be driving one shortly - how did you find space in the i4 - anyway bigger than expected?
SITREP #2 Progress, but not logical progress on the Sunsynk. So I changed the Sunsynk over to AGM-V Good - I was able to charge to 100% and...
Hey I ran active balancer for the first 3 cycles. Voltage on the screen looks in good shape per cell. Figuring out the Sunsynk however......
Ok, I have ths mode turned on. How did you know what voltages to set on the inverter?
Latest Posts
-
RE: Mitsubishi cycling while on chilled water output
On the buffer tank issue, I use Perplexity more and mor...
By downfield , 7 minutes ago
-
RE: Commencing on an ASHP Installation Process
A system like that seems susceptible to significant amo...
By Majordennisbloodnok , 3 hours ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 24 hours ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 1 day ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 2 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
Can we have some links to those you're considering plea...
By Transparent , 2 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 3 days ago
-
@hughf, I think we’ll organise an RHH session at Instal...
By Mars , 3 days ago
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 4 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 4 days ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
@m1kegibson If you are able to access the service me...
By HarriUp , 4 days ago
-
RE: When will heat pumps and install prices come down?
... which of course is impossible because the world mov...
By JamesPa , 4 days ago
-
RE: Battery storage to run Heat Pump.
I would be surprised if the battery chemistry is going ...
By Transparent , 5 days ago
