Forums

Forums
Members
Gary
Activity
 
Notifications
Clear all
Gary
@gary
Member
Prominent Member
Joined: Feb 8, 2023
Last seen: Jul 4, 2025
Profile Activity
Topics: 2 / Replies: 348
AllTopicsReplies
Reply
RE: Energy Tariffs and consumption fiddling

Agree with John, forget how you used to run your boiler, last night it was between 7-10°C outside, my heat pump came on at 12am ran continuously for 6...

10 months ago
Forum
Electricity, Tariffs, Monitoring & Providers
Reply
RE: COP or Cost Per kWh

I’m on IOG at 7p off peak have heatpump, solar and battery my total peak electrical consumption last year was 200kwh costing £60. I was looking at ge...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
Swapping back to Hive – is it the right thing to do?

Neomitis have their own app Myneomitis, so depending on the thermostat model you have you may be able to connect to it remotely.

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ASHP using its immersion, but I dont know why

@tufty Also make sure that you have the heating timer set up for that length of time as well otherwise the timer will cut it off as well but at least ...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ASHP using its immersion, but I dont know why

@tufty That will be your problem then, just change it to 2 hours, its using the immersion as you have restricted the run time of the heat pump to he...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ASHP using its immersion, but I dont know why

I agree with Johnmo, 55C is right on the limit of immersion being required for the Ecodan, did you increase the DHW set temp in Jan 24, as that would ...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Will heat pump heat hot water without increasing the temp in my home?

@ellyse Zoning refers to shutting off part of the heating system emitters e.g. having thermostats closing off UFH loops in certain rooms or TRV's clos...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ECODAN ASHP General Set-up and efficiency.

@ngillam No hot water is unaffected the heat pump just turns back to heating for hot water and back to cooling when its finished. What you do ha...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ECODAN ASHP General Set-up and efficiency.

Cooling is really easy to set up on the Ecodan. Turn off the power to the heatpump and the control unit, unscrew the front panel of the main controll...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Two possible heat pump routes - how to evaluate them?

hopefully the heat loss is less than calculated and the living room will be warm enough at lower flow temps not a lot else you can do you seem to have...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Two possible heat pump routes - how to evaluate them?

Why is the bedroom rad over twice what is required yet the lounge barely covers the heat loss. I may be talking rubbish but logically doesn’t that sa...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ECODAN ASHP General Set-up and efficiency.

I just use the timer on tne main ecodan controller it’s set for 2 hours overnight and no reheat set to 48C and the tank lasts family of 4. 2 showers, ...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 18 / 30
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts