Last seen: Sep 19, 2024
@jamespa Sorry, Freudian slip, it should have been labelled Wh. The data, including Energy In Reduction and Energy Out Reduction, was just extract...
@cathoderay There is indeed a degree of complexity within the spreadsheet, but I think that by now most forum members will have come to the conclusi...
You're welcome. Please feel free to question anything that you do not fully understand.
Please find attached the underlying spreadsheet for you to criticise.
No. If there were no external factors the prediction indicates that the IAT would stabilise at 19.31C, falling to 17.32C by the end of each setback pe...
@jamespa I can now provide some figures that may be useful in understanding what may be occurring within a hypothetical home during an overnight set...
@kev-m Thanks Kev, no problem.
@jamespa Hi James, I have some thoughts concerning the data but I would prefer not to comment at the moment, since if I am not 110% correct, anyth...
I have requested as much data as possible to be able to test the accuracy of the modeling tool, which I think will be the most productive way to proce...
You appear to be correct that employing some form of setback will produce better energy savings in some buildings rather than others, which is one of ...
If you would care to provide some data from your system covering particular periods I can run it through the model to see how the results match. Dat...
Try lowering 2103.
Latest Posts
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
ok my setup is pretty simple: 7.35kw cibse heat loss ...
By AdamK , 4 hours ago
-
RE: How to choose Towel Rails for an ASHP
In one en-suite bathroom we have a 180cm high towel rai...
By Judith , 5 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
This is actually based on the same chipset as the Svena...
By Grantmethestrength , 5 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
@adamk what you need is enough battery size to cover 3 ...
By Judith , 11 hours ago
-
-
RE: Say hello and introduce yourself
@jarlatheoin do put the MVHR in early it’s not an easy ...
By Judith , 11 hours ago
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 12 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 13 hours ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 1 day ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba might be able to help as an Ecodan expert.
By Mars , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 2 days ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 2 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 3 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 3 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 3 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 5 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 6 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 6 days ago
