Last seen: Sep 19, 2024
Some manufacturers do publish operating data performed during standard test conditions. That is the source of data behind the Modeling Tools I have cr...
Don't worry, the neighbours will complain about the noise and then the heat pump will have to be moved or removed. But having been installed it will h...
The temperature sensor will be inside the controller, unless you have installed a remote unit, so will be of no use for room temperature control. Yo...
Where is the controller located?
It would appear that your heat pump is cycling. Is your heat set for a fixed Leaving Water Temperature (LWT), in Weather Compensation (WC) mode, or ...
@cathoderay Excellent data once more. The fact that the OAT reading appears to increase by approximately 5C during the setback period, would make ...
The reason that I mentioned the cycling was because of the fact that it makes doing an accurate comparison between theoretical and actual that more di...
Could you explain the reason for wanting the heat pumps to run in tandem? I would have thought that if the actual heating demand, is not greater than ...
@cathoderay The Modbus registers are two byte 16 bit long. When displayed in binary the left-hand end is normally denoted to be the Most Significant...
@jamespa Sorry James, I forgot to fully answer your query. The WC Modeling Tool infers that Energy Supply will be a product of LWT and the capacit...
@jamespa Yes, the raw data was kindly supplied by CathodeRay, the accuracy of which I am not questioning. My objective is to try to avoid the comp...
AA mode is designed to keep the IAT constant, so to the controller even 1C setpoint change is a large deviation between desired and actual. This is th...
Latest Posts
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
@grantmethestrength, if you pull the trigger on the FRV...
By Mars , 46 minutes ago
-
RE: How to choose Towel Rails for an ASHP
@judith Yes I agree. They are extremely expensive. ...
By GrahamF , 1 hour ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@downfield I have never added a buffer sensor as we nev...
By ASHP-BOBBA , 1 hour ago
-
Riello NXHM Monobloc Air Source Heat Pump
Hi, does anyone have any feedback on Riello NXHM Monobl...
By dgarvey , 9 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
This is actually based on the same chipset as the Svena...
By Grantmethestrength , 12 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
@adamk what you need is enough battery size to cover 3 ...
By Judith , 18 hours ago
-
-
RE: Say hello and introduce yourself
@jarlatheoin do put the MVHR in early it’s not an easy ...
By Judith , 19 hours ago
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 19 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 20 hours ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 2 days ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 3 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 3 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 3 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 4 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 6 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 6 days ago
