Last seen: Sep 19, 2024
@cathoderay Minute by minute actual OAT data is required so as to compare this to your Midea OAT data, averaged data is of no use. The reason I am...
@cathoderay If you still wish to have an independent OAT sensor, you could consider coating an MD02 with circuit board lacquer and then putting it w...
I may have suggested trying a fixed LWT for a period of time to stabilse the system, in a similar manner to switching a swinging industrial control sy...
What I am suggesting is to not have a setback, but keep your AA system, since this should automatically request the lowest LWT that meets demand whils...
Running the heat pump constantly at lower LWT, should help reduce the cycling and defrosting, until you can do something to alleviate the 'cold well' ...
Have you resolved your problem? Feedback is always welcome.
Have you resolved your problem? Feedback is always welcome.
@cathoderay I think that you will find that the cycling is most likely due to the 'cold well' effect, which appears to be shown by the raw data. W...
Excellent data once more. It would be interesting to see how the OAT value on the chart compares with OAT readings from local weather stations.
I'm afraid that I don't have details concerning the AA algorithms, but a normal industrial type control system would probably react in the same manner...
Thanks Kev, no rush. Could you also please add the RWT values so that I can ascertain when the compressor is running.
@kev-m Hi Kev. I'm going to run the raw data that you kindly supplied, but I need to set the initial conditions for your system. Could you please ...
- 26 Forums
- 2,148 Topics
- 47 K Posts
- 41 Online
- 5,666 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Ecodan & MelCloud scheduling
Yes, the 2 are separate. To add to the complex desig...
By HCas , 5 hours ago
-
RE: Electricity price predictions
@diverted-energy so that’s where I think you are wrong....
By JulianC , 5 hours ago
-
@drei has just published his full story here for anyone...
By Mars , 6 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
I think there may be a little confusion in the wording ...
By Old_Scientist , 10 hours ago
-
I should clarify that the FoxESS web interface is not l...
By Old_Scientist , 11 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
Previous was vented and I needed a shower pump and a ve...
By JamesPa , 11 hours ago
-
RE: Mitsu Wireless Controller and MelCloud
@robs Hi Rob, At the end of a note to Mitsu UK, thank...
By DavidAlgarve , 1 day ago
-
RE: Why so many sigenergi installer recommendations?
@adamk Tesla is a great option, it’s also one we instal...
By SAEnergy , 2 days ago
-
RE: Rodents! A word of warning for heat pump owners
Hradline in Telegraph: Brace for plague of rats after s...
By Tim441 , 2 days ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
As a potential heat pump customer, it would be good to ...
By Temperature_Gradient , 2 days ago
-
RE: Octopus replacing the fixed 15p/kWh export rate with a market tracking one
@trbob I have just extracted the details for Agile Expo...
By Toodles , 2 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
The Ultimate Guide to Heat Pumps is less than a month a...
By Mars , 2 days ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 3 days ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 3 days ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I estimated our usage on the following basis. The mos...
By Old_Scientist , 3 days ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 4 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 5 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 6 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 1 week ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 1 week ago