Last seen: Sep 19, 2024
As far as the gauge or thickness of the cable is concerned, this will depend upon the maximum quantity of power to be moved and the voltage. If you ...
This method has been tried, but failed. You may have greater success. Unfortunately Ian is reluctant to make any physical changes to his system. Th...
@transparent It is actually referred to as 'combined cycle operation' rather than 'closed cycle operation'. We did have a system as you suggest, i...
@mellow While it may have a label stating buffer tank, it appears to be piped as a volumiser.
@iantelescope I would suggest that you check the Chemistry of the water within your system.
@mellow I doubt that it is a buffer tank if you do not have a secondary water pump, since the system would struggle to work correctly. It may be a v...
It could even be that the present radiator size is adequate, and that the flow rate has been reduced with the lockshield valve to lower the temperatur...
@iantelescope Electric motors, by their very construction and operation, present a predominantly inductive load rather than a capacitive one, so I f...
@gunboatdiplomat From my limited knowledge an actual buffer tank can have quite a number of possible pipe connections with unused ones simply being ...
The blue line is how much thermal energy the heat pump should provide, the red line is how much electrical energy the heat pump would be using.
I think that what you are failing to appreciate is that the required LWT is dependent upon the actual heat loss and heating capacity of the heat emitt...
Latest Posts
-
RE: Preparing for 2nd winter in new build house.
The setting is on the room stats. That room has 2 loops...
By sbm74 , 8 minutes ago
-
RE: Help me keep the faith with my air source heat pump installation
But presumably leaving the clips, visible in the photo,...
By JamesPa , 22 minutes ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
A flow rate of 0.36 cubic metres per hour seems quite l...
By cathodeRay , 36 minutes ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 2 hours ago
-
RE: Boxt Heat Pump Installation Experience
Welcome to the forums. Was there any formal in-person...
By Mars , 4 hours ago
-
RE: Say hello and introduce yourself
@transparent Morning. Just put a lengthy post on the AS...
By sbm74 , 4 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@old_scientist 3. Some pipe work is ...
By GrahamF , 4 hours ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 14 hours ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 21 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
Yes I was thinking of outdoor, IP65 batteries with buil...
By Temperature_Gradient , 1 day ago
-
@jamespa Thanks. Yeah any adjustments Ive made at pr...
By cliffhanger , 1 day ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 3 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 3 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 3 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 3 days ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 4 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 4 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 4 days ago
