Last seen: Sep 19, 2024
@jamespa I partially agree with your assessment, but I would say that the determining factor of how much thermal energy is transferred is the averag...
Have you noticed any differences since the alterations were completed?
@sunandair Thank you for carrying out the detailed testing and producing the excellent results. Whilst it is possible to predict likely outcomes in ...
It is actually called a 'back-up heater' and is in addition to the immersion heater, which would be located in the hot water cylinder. The purpose of ...
All that I can suggest is that you trace back along the cable to the place from which the heater is supplied. Is this heater the DHW cylinder immers...
Heat pumps are not designed to provide central heating and DHW heating at the same time. DHW heating requires a much higher leaving water temperatur...
@leichat CathodeRay managed to locate and extract some data from the Mideo controller and data stream.
Did you resolve your problem? Feedback is required to prevent wasted effort.
I would suggest that you read through the attached guide and see if it throws any light onto your problems.
@squiff The size of any required expansion vessel is dependent upon the total volume of the system (radiators, UFH and pipework etc), the greater th...
There are a number of options, which may depend on what you are trying to achieve. I am not 100% certain, but would it be possible to keep your pres...
Quite. It is necessary to ask a prospective installer to provide a copy of the capacity data tables for their proposed heat pump and see how that comp...
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
@papahuhu I too have Homely control but do not use Smar...
By Toodles , 18 minutes ago
-
Our region has increased to 14.794p which is a 14.6% in...
By Old_Scientist , 53 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@andrew-j-h There are two things in life that are certa...
By Toodles , 3 hours ago
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
Honestly I think that's a waste of time in almost all c...
By JamesPa , 5 hours ago
-
RE: Boxt Heat Pump Installation Experience
Glad to hear another mostly positive review of BOXT, as...
By Ashfp , 6 hours ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba might be able to help as an Ecodan expert.
By Mars , 9 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 9 hours ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 1 day ago
-
How to Zone with a Single Room with UFH
Hi all, I am currently looking at a project ...
By Renewables345 , 1 day ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 1 day ago
-
RE: Say hello and introduce yourself
@transparent Morning. Just put a lengthy post on the AS...
By sbm74 , 1 day ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 2 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 2 days ago
-
RE: Powerwall 3 or Myenergi or something else?
Yes I was thinking of outdoor, IP65 batteries with buil...
By Temperature_Gradient , 2 days ago
-
@jamespa Thanks. Yeah any adjustments Ive made at pr...
By cliffhanger , 2 days ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 4 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 4 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 4 days ago
