Forums

Forums
Members
Clockworks
Activity
 
Notifications
Clear all
Clockworks
@clockworks
Member
Estimable Member
Joined: Jan 22, 2025
Last seen: Apr 26, 2025
Profile Activity
Topics: 2 / Replies: 53
AllTopicsReplies
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Controlling the "on/off" using the Mitsubishi wireless remote isn't going to work in practice. It does switch off, but only if I set the target ...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Jiggling the pin gets it going again, but it just jams again if I (or the TRV) closes it right down. I've left the Evohome TRV head off, and I've a...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Graphs for midnight onwards this morning, cycling much reduced. Running in Auto Adapt mode, with the Mitsubishi wireless thermostat set to 0.5 degre...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Thanks for the link and the chart. Says what the aims are, which is what I expected it to do. I've decided to leave the Evohome relay connected ...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Finally got time to fit the wireless remote, and try auto adaptation mode this morning. I left the Evohome boiler relay connected, but I'll have to ...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Heat pumps, electric cars, and climate change seem to be very divisive subjects. I'm not sure there's any way to educate the general population, short...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Thing is, many people replacing a gas or oil boiler with a heatpump will already know (or be able to easily find out) how many kWH their house needs p...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan Legionella cycle - immersion heater problem

Sorry, posted on the wrong thread

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

I've got the WC curve set for 49 degrees at zero, 32 degrees at 16 outside. 6 degrees outside today, so it's flowing at 43 degrees. Rooms are all ...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

That sounds feasible. Assuming it's currently set at the default (-5 to +5), then it doesn't appear to be working in WC mode - it's currently stopping...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

I was going to look at Thermo Diff, but it said I had to shut down before I could even see what the current settings were. Would you suggest lowerin...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan 6kW - is it "cycling", or normal operation?

Interesting. I'll have a trawl through the installation manual for the Ecodan, see if there's anything similar. I'm right down west, between Hel...

7 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 2 / 5
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →