Last seen: Aug 11, 2025
Keep it out in the open! Others will want to have a look and possibly comment. The heat loss report estimates the heat loss to be 7.42kW at -5.28°C ...
@jamespa - thank you for your ongoing heroic attempts to make sense of all this. I too had noticed this different behaviour. Here are the two per...
For completeness sake, and I may as well document it here as anywhere else, I have now done the other test I mentioned earlier for whether the two sam...
It may be be because the controller has been changed, and has gone to some albeit rather odd defaults. See if you can set them to what you had before....
And finally, the R version tidied up a bit and larger, so 95% confidence interval bands are more visible: The R code used (slightly different,...
Calculation based heat loss assessments are often particularly over the top for older buildings because the assumed U values for walls are just plain ...
Now we are all posting at the same time! One thing to add - I agree with @jamespa, there is no such thing as a ridiculously low curve, only a curve th...
@cliffhanger @editor - I would be inclined to ask how and why is the overshoot happening. I'd start by looking at the estimated heat loss, and how the...
Here's the same plot, less the R squared values, done quick and dirty in python, with the one done in R on the right: They look the same to me a...
Latest Posts
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
@old_scientist me too. Just installed my new heat pump ...
By Eliuccio , 9 hours ago
-
RE: Is your heat pump insured?
Yup just spoke to Privilege to inform them of my impend...
By Scalextrix , 10 hours ago
-
Well by my reckoning based on the Flexible Octopus unit...
By Majordennisbloodnok , 11 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist I have had the first PW for some 2 years...
By Toodles , 11 hours ago
-
RE: Forum updates, announcements & issues
Just to keep everyone in the loop, as the site continue...
By Mars , 19 hours ago
-
RE: Fast DHW setting on Midea (Clivet) heat pump
@simon-w, is this something you could potentially assis...
By Mars , 1 day ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Fwiw I called my installer out for the first time a few...
By JamesPa , 1 day ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@sandy, I'll send Vaillant an email tomorrow and see if...
By Mars , 2 days ago
-
RE: Long term efficiency degradation
@jamespa yes as I thought thanks. We have a reaso...
By Scalextrix , 2 days ago
-
RE: Who has a V2G EV installation
I agree, but a word of caution. V2X is also sometimes u...
By Majordennisbloodnok , 2 days ago
-
RE: Sunamp Thermino Heat Battery
@jamespa A few days after the installation had been com...
By Toodles , 3 days ago
-
RE: Planning Permission May 2025
Fair enough. I have read the legislation and MCS020a ...
By JamesPa , 4 days ago
-
RE: How do I choose a single room MVHR to prevent losing heat in my bathroom ?
An update on the Heatsava. It is the most difficult thi...
By heat-pump-newbie , 5 days ago
-
RE: ASHP heat output monitoring
@carlo - not much better, is it. It looks more like a u...
By cathodeRay , 6 days ago
-
RE: Renewables & Heat Pumps in the News
this document extensively describes (in a non-blame, ne...
By Judith , 6 days ago
-
RE: Ecodan - Legionella Operation Time and Target Temperature
Once the white plastic cap is removed, my immersion loo...
By Old_Scientist , 7 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@dgclimatecontrol I don't know, but they were not happy...
By DavidAlgarve , 7 days ago
-
RE: Why do we need pressurised systems?
A good question @toodles. My old open thermal store and...
By AllyFish , 7 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
Cross references for @martingale Background discussi...
By Transparent , 1 week ago
-
@ecobaker May I ask a question of you please. I too hav...
By Papahuhu , 1 week ago
