Last seen: Sep 21, 2025
@jamespa - agreed. But never one to sit still, I have been thinking about another possible cause for the low OAT deficit, which does involve, indeed i...
@jamespa - all agreed, even most of the part in the middle about the PWM cable connection/disconnection test, with the minor difference that while the...
I don't think we are far apart, what differences there are are down to semantics and writing styles. I note you tend to use explicit often bracketed c...
To I hope clear up some points: I can say what I like (within the usual limits) but equally I am open to refutation! This is actually a woolly bi...
Perhaps the most interesting period in the chart is not when the heat pump is misbehaving, but when it is behaving, ie running at steady state, eg be...
Thanks. In reply: The flow temps are high by design. The rads (all rads, no UFH) are as large as can be (and are are all bar two K3s) but the height...
Part 4: Software Installation - OS (operating system) and Home Assistant Disclaimer(and this is entirely my fault): because I did my own install...
Great, and good luck! Do take your time, the old think three times, measure twice and cut once routines. If you have any questions, don't hesitate to ...
As I'm on the case... It looks like these are the LG modbus wire connection terminals, from this HA thread:
Latest Posts
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 2 minutes ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
Just come across this video on youtube We have all...
By benson , 5 minutes ago
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
@rhh1 Adding a second pump is not a problem, some units...
By Brendon Uys , 54 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 1 hour ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 13 hours ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba might be able to help as an Ecodan expert.
By Mars , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 1 day ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 2 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 2 days ago
-
RE: Say hello and introduce yourself
@transparent Morning. Just put a lengthy post on the AS...
By sbm74 , 2 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 3 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 3 days ago
-
RE: Powerwall 3 or Myenergi or something else?
Yes I was thinking of outdoor, IP65 batteries with buil...
By Temperature_Gradient , 3 days ago
-
@jamespa Thanks. Yeah any adjustments Ive made at pr...
By cliffhanger , 3 days ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 5 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 5 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 5 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 5 days ago
