Last seen: Sep 25, 2025
Back in January, I did something similar, in effect getting the data from these bytes. Here are the notes I made at the time: data_offset + 16 = 5da...
@derek-m - there were some tab/indent errors, which crashed it, which I corrected and it ran, but nothing showing up for outdoor_temperature as it nee...
@derek-m - I'll try running it as is, if it crashes I'll uncomment/comment it as you suggest.
Just a thought - a c3 device ie a heat pump doesn't know about indoor humidity, so it can't put humidity data in the message. If any data does appear,...
Yes and no, they are in that list, but as far as I can see the selection drop-down list contents come from the very similar list in midea_devices.py (...
None of the byte_05 entities, which have been running overnight, have collected any data, either in HA itself or in the logs. It has the very li...
Sorry, forgot to answer this. This is the current midea_devices.py list for C3 devices: 0xC3: { "name": "Heat Pump Wi-Fi Controller", ...
I think that is a very useful objective. We're pretty sure it is in the 04/04 message, if we can then make it appear in the 03/01 message, then we hav...
@derek-m - I've also added this to the right place at the end of c3/message.py so we test for multiple body types in one pass: self._bod...
@derek-m - that's very interesting, and armed with it, I had another look in HA and it turns out the extra sensors are visible in Midea AC LAN > co...
If UI means the wired controller as I think it does, I think you are right, it is the master (so any and everything else is/are slaves). But I think t...
I'm pretty sure both Freedom and Homely use a wired modbus approach, making a physical connection to the H1/H2 connections in the wired controller. ...
Latest Posts
-
RE: Moving FIT array onto a Tesla Powerwall 3 possible?
We had a solar array to start, hooked direct into the m...
By AgentGeorge , 4 hours ago
-
RE: Samsung Gen 6 - Schedules not working
@old_scientist Thanks. I'll check the FSVs tomorrow. Ye...
By bontwoody , 7 hours ago
-
RE: DNO export limit problems.
So you're planning to add a PW3 to the existing setup (...
By Old_Scientist , 7 hours ago
-
It's currently a 5kW/15kWh Libbi, as we're homeworkers ...
By wully , 9 hours ago
-
RE: Do I just go with the lowest quote for my heat pump?
@toodles I have electric pet blankets 🙄 If req...
By Jancold , 9 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
Signed
By Judith , 10 hours ago
-
RE: Which thermostat should I get (or do I need one?)
Whether you need a separate thermostat for your UFH hea...
By Judith , 10 hours ago
-
@drei just a small detail on your table posted on the 2...
By Judith , 10 hours ago
-
RE: Large heat pump options for church building
I should think that a heat loss calculation might be a ...
By Toodles , 11 hours ago
-
RE: Say hello and introduce yourself
I've started a topic in the Heating Alternatives sub-fo...
By wully , 13 hours ago
-
@toodles Im trying my best but it is getting a tad tedi...
By bontwoody , 13 hours ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
Indeed. If the primaries are not big enough to carry th...
By Old_Scientist , 17 hours ago
-
RE: Clivet ASHPs and weather compensation
It sounds like weather comp may not be activated. Give ...
By Simon Wardle , 20 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
I just looked at mine. My flexis (which run horizontal...
By JamesPa , 22 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Manufacturer: Vaillant Model: Arotherm Plus 7kW Typ...
By MatWin , 1 day ago
-
@papahuhu Sounds as though you need to speak to your in...
By Toodles , 2 days ago
-
I ‘did the math’ for Nov. to the end of April to be on ...
By Toodles , 2 days ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
@tasos automations on Home Assistant so if there is a p...
By benson , 2 days ago
-
RE: Sizing - Save me from my headache
Mitsi 8kW has a 6kW variable and 2kW fixed compressor s...
By JamesPa , 3 days ago
