
Last seen: Sep 25, 2025
@iancalderbank - I have got a bee in my bonnet (actually it is more of a hornet's nest) about HA, based on my experience, but I fully accept that othe...
@dealstriker - welcome to the forum, and to the crazy world of the Midea controller. I have my controller set up to have the DHW heating on between ...
Rather than get tied down in bitwise stuff (which most people including me find baffling) I'm sticking with string extraction for now. I already hav...
@majordennisbloodnok - all good points, as ever. I think part of the problem, perhaps the main problem, is that I made an early decision to present al...
More comedy cr@p from HA: how do I run my python modbus script on the mini PC given HA's control freakery over what you can and can't do? Apparently...
@derek-m - just realised I could set a higher tank set temp and override the timer to get the hot water heating to come on, which it did, confirmed by...
@derek-m - I've just run the code with on_off = instrument.read_register(129, 0) and got this as the binary output: 2023-03-20T18:33:26,10000001...
@iancalderbank - thanks again for the clarifications, others will no doubt benefit too. Brief summary: DO use a reserved IP address set in your rout...
@derek-m - I've just realised that some of the modbus tables look almost the same but they are not. The manual I have has this for register address 0:...
Thanks for reminding me, that is what I did. I recall also having a moan about the fact that the HA static ip address documentations totally fails to ...
Thanks for your comments, much appreciated. I did in fact go though IP addresses at various points, on the assumption (this time perhaps OK!) that beg...
There's quite a lot not to like about this chart, but still worth posting as proof of concept. I've had the python code running over three hours, logg...
- 26 Forums
- 2,183 Topics
- 48.1 K Posts
- 46 Online
- 5,756 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Samsung Gen 6 - Schedules not working
@old_scientist Thanks. I'll check the FSVs tomorrow. Ye...
By bontwoody , 18 minutes ago
-
RE: DNO export limit problems.
So you're planning to add a PW3 to the existing setup (...
By Old_Scientist , 19 minutes ago
-
Moving FIT array onto a Tesla Powerwall 3 possible?
I currently have a 3.68kw inverter hooked up to 4kwp of...
By AdamK , 46 minutes ago
-
It's currently a 5kW/15kWh Libbi, as we're homeworkers ...
By wully , 2 hours ago
-
RE: Do I just go with the lowest quote for my heat pump?
@toodles I have electric pet blankets 🙄 If req...
By Jancold , 2 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
Signed
By Judith , 2 hours ago
-
RE: Which thermostat should I get (or do I need one?)
Whether you need a separate thermostat for your UFH hea...
By Judith , 3 hours ago
-
@drei just a small detail on your table posted on the 2...
By Judith , 3 hours ago
-
RE: Large heat pump options for church building
I should think that a heat loss calculation might be a ...
By Toodles , 4 hours ago
-
RE: Say hello and introduce yourself
I've started a topic in the Heating Alternatives sub-fo...
By wully , 6 hours ago
-
@toodles Im trying my best but it is getting a tad tedi...
By bontwoody , 6 hours ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
Indeed. If the primaries are not big enough to carry th...
By Old_Scientist , 10 hours ago
-
RE: Clivet ASHPs and weather compensation
It sounds like weather comp may not be activated. Give ...
By Simon Wardle , 12 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
I just looked at mine. My flexis (which run horizontal...
By JamesPa , 15 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Manufacturer: Vaillant Model: Arotherm Plus 7kW Typ...
By MatWin , 1 day ago
-
@papahuhu Sounds as though you need to speak to your in...
By Toodles , 1 day ago
-
I ‘did the math’ for Nov. to the end of April to be on ...
By Toodles , 1 day ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
@tasos automations on Home Assistant so if there is a p...
By benson , 1 day ago
-
RE: Sizing - Save me from my headache
Mitsi 8kW has a 6kW variable and 2kW fixed compressor s...
By JamesPa , 2 days ago