Last seen: Sep 23, 2025
@downfield I have never added a buffer sensor as we never have used a buffer, I know on many brands you can add them as well as a flow sensor. I would...
@jamespa Oh big question but my only thought is to give hands on training and share as much knowledge as we can but this is a very safe but slow metho...
@editor Once you have completed this exercise and naturally you point out all of the flaws and errors which will no doubt lead to the conclusive "how ...
@editor looking forward to the case study 🙂
if you fix the thing that is supposed to be free moving to absorb vibration to will pass the vibration down the line, flexes need to be free floating ...
sorry i needed to be more clear, is the pink the flexes?
Levels don't look terrible and it appears they cast concrete bases so i would have through these would be level? so the wall clips are holding th...
@drei Oh dear, so is this system brand new and still not working and you are in the middle of perusing the installer? I can see your having trouble ge...
Sorry, I should also add these checks The ASHP must be dead level no exceptions, this helps the mounts on the compressor evenly dissipate the vibra...
@adamk If you are willing to investigate you can take a large flat screwdriver, place it on the area near the noise and measure by simply gauging the ...
@pash44pump I hope you get the service you are looking for, I have fiends in Bath and near Wiltshire, beautiful area of the country.
I am pleased to say at 4pm today we have added another client onto Havenwise, the system has a new 8.5kW Ecodan connected to new UFH throughout with m...
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
The real answer is trial and error, because there are a...
By cathodeRay , 42 minutes ago
-
@drei Id be wary of the reference in quote 1 to reattac...
By benson , 15 hours ago
-
RE: Renewable Heating Hub WhatsApp Channel
I clicked on the link and have WhatsApp on the computer...
By dgclimatecontrol , 16 hours ago
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
@editor yeah i looked at those but id need 12+ for my p...
By AdamK , 16 hours ago
-
RE: Say hello and introduce yourself
Thanks for the warm welcome @editor and can't wait to b...
By Pirate Rich , 18 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
Let's also bear in mind that Fogstar supply more than o...
By Majordennisbloodnok , 21 hours ago
-
RE: How to choose Towel Rails for an ASHP
@judith Yes I agree. They are extremely expensive. ...
By GrahamF , 1 day ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@downfield I have never added a buffer sensor as we nev...
By ASHP-BOBBA , 1 day ago
-
Riello NXHM Monobloc Air Source Heat Pump
Hi, does anyone have any feedback on Riello NXHM Monobl...
By dgarvey , 1 day ago
-
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 2 days ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 3 days ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 4 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 4 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 4 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 5 days ago
