Forums

Forums
Renewable Heating
Introductions, Foru...
Say hello and intro...
 
Notifications
Clear all

[Sticky] Say hello and introduce yourself

 
Page 15 / 103
Introductions, Forum Rules & Updates
Last Post by Transparent 2 weeks ago
1,234 Posts
254 Users
712 Reactions
214.6 K Views
RSS
 Peterr
(@peterr)
Estimable Member Member
Joined: 4 years ago
Posts: 67
18/11/2021 5:52 pm  

Hello,

Just joined the forum because we have recently (4 weeks ago) taken the plunge and switched from LPG boiler to ASHP.

I am now just starting to fiddle with the system a bit, because I am not convinced it has been set up in the most efficient way by the installer.  I will probably have a few questions!

Cheers,

Peter.


   
👍
4
ReplyQuote
Morgan
 Morgan
(@morgan)
Noble Member Member
Joined: 4 years ago
Posts: 624
18/11/2021 6:01 pm  

@peterr 
Welcome to the forum Peter.  There are some very knowledgeable people here so ask away.  I’ve gained a huge amount of assistance and thus understanding as a result of being here and asking questions.  Like you I’m a new adopter and had my ASHP commissioned only a couple of weeks ago.

Good luck.

Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.

2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.


   
👍
4
ReplyQuote
 Kev M
(@kev-m)
Famed Member Member
Joined: 4 years ago
Posts: 1276
18/11/2021 6:07 pm  

@peterr, welcome.

If you give a few details about your system and how it's set up I'm sure someone will be able to help. I've has my ASHP a few months; have learned a lot but still learning.

 


   
👍
4
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3403
Topic starter 18/11/2021 6:09 pm  

@peterr, welcome to the forums. Please start a new thread in the ASHP section with the name and size of your heat pump, which will become your dedicated thread. If you're not sure how to do that, just post our reply below and I'll move it.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
👍
2
ReplyQuote
 Cooperman1955
(@cooperman1955)
New Member Member
Joined: 4 years ago
Posts: 1
22/11/2021 9:00 pm  

Hi everyone!

In the process of having GSHP installed.

Still using the Calor gas system for a few more days. Big garden looking like a WW1 scene.

Anyone here used Miller from North Walsham?


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3403
Topic starter 23/11/2021 8:44 am  

@cooperman1955, welcome to the forums. Please start a new thread in the ground source forums and tell us a bit about what you’re installing.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote



 warren s
(@warren-s)
Active Member Member
Joined: 4 years ago
Posts: 8
28/11/2021 2:39 pm  

hi guys , my name is warren , i now live in budapest and am looking into heat pumps for my new build home .


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3403
Topic starter 28/11/2021 2:43 pm  

@warren-s, welcome to the forums. What kind of heat pump are looking to install? Air to air or air to water?

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 warren s
(@warren-s)
Active Member Member
Joined: 4 years ago
Posts: 8
28/11/2021 3:11 pm  

hi mars , not too sure yet . have just finished the building design and am now looking into heating systems . was suggested that air to water would be good as was going to go with a conventional gas boiler setup but will have between 6-10 kw solar system (dependent on local reg agreement ) . finding it difficult to gauge the heat loss for building as all calculators i have found dont include the materials i will be building in . open to all ideas as this is a fact finding mission . building in budapest is not easy to get the info you require and the language barrier does not help .

warren

 


   
ReplyQuote
 Kev M
(@kev-m)
Famed Member Member
Joined: 4 years ago
Posts: 1276
28/11/2021 4:39 pm  

@warren-s

Hi Warren,

in case you haven't seen it, this forum may help you with questions about different building materials, insulation, etc.  I'm sure if you ask you will be able to get advice on heat loss for the materials you are using.

https://forum.buildhub.org.uk/

Kev


   
ReplyQuote
 warren s
(@warren-s)
Active Member Member
Joined: 4 years ago
Posts: 8
28/11/2021 4:56 pm  

@kev-m thanks kev . i know my materials and their u values but the calculators dont list them or give option for custom input .

maybe i will start a thread listing materials and u values see if anyone has a calc that will let me use my data ?

have a million questions but dont want to swamp forum .

warren

 


   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3403
Topic starter 28/11/2021 5:01 pm  

@warren-s, starting a new thread to speak about materials and u-values is a great idea.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote



Page 15 / 103
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →