Hi everyone, i am a new member Deekie, with a 5kW Ecodan (FTC5) ASHP at a small bungalow on the west coast of Scotland. My system is about 4yrs old, is very reliable and by experimenting with my own settings i think i have it running as efficiently as i can. Although it always reports a relatively poor COP (2 to 2.5 ave) i think that may just be a reporting problem, as i am quite happy with the system overall and the electricity savings are huge over other systems i have had in my previous homes.
I have two goals; improve its efficiancy and add enough solar & batteries to take the ASHP completely off-grid.
Cheers, Deekie :o)
@deekie Having enough solar power to keep any ASHP provided with power without resorting to the grid is a lovely thought, though I doubt possible! At the very time when the most heat from the heat pump is required, the solar energy available is at its’ least; (November - February approx) therefore, also the time when the solar PV is least productive. I don’t think battery storage would provide more than day to day buffering - even if you have say 30 kW/h capacity storage available. I have only experienced a late winter with an ASHP as yet as it was not commissioned until the 19th. February, 2023 so next winter is going to be my first real experience of trying to supply all the power required at the lowest cost. With 27 kW/h of storage and 8.1 kWp of PV (which is likely to provide approx. 150 kW/h in the month of January for example) my hope is that I’ll be able to fully charge the Powerwalls at cheapest rates twice a day and have any contributions from the PV to top this up and by this means, keep the ASHP plus other house loads (including DHW) running at lowest charges possible. I am with Octopus Energy using Agile plus fixed export tariff suring the summer. I hope to have built up a ‘buffer’ by the winter from all the expotted excess. Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Hi Everyone
I’m Gill and like Deekie, I too am on the West coast of Scotland.
We had an ASHP installed recently to replace our failing Oil central heating.
It appears to be working fine, we are certainly toasty, but I want to ensure we are getting the maximum efficiency from it. Hence me joining this forum to seek further information. Once I have finished this introduction I will explore the site and see who else has the same model as us.
Ours is a Grant Aerona, HPID17R32
Our installation was impressive. It was completed in a week including removing and disposal of the old system. We had new radiators throughout, new and larger cylinder and the pump placed inconspicuously at the end of the house. The team of installers were thorough and incredibly neat and tidy. We were well impressed, and also pleased that we were able to use a local company.
- 22 Forums
- 2,084 Topics
- 46 K Posts
- 38 Online
- 3,377 Members
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@cathoderay thanks I have just figured it out. You need...
By benson , 15 minutes ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@ashp-bobba thank you, and equally so, thank you for ta...
By Mars , 5 hours ago
-
@judith good to know… I’ll continue to feed Wattson, an...
By Mars , 16 hours ago
-
RE: Vaillant AroTherm Plus 7kW
@jamespa I have a hydronic baseboard heater in the kitc...
By Scalextrix , 22 hours ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
@editor great article re accreditation. I note ISO/IEC ...
By Bart , 1 day ago
-
RE: Renewables & Heat Pumps in the News
Here’s a little more technical detail/p>
By Judith , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
I don't (yet), but my PW3 is due to be installed shortl...
By Old_Scientist , 2 days ago
-
RE: MCS and NAPIT complaints process
@chrislay, is your heat pump complaint still unresolved...
By Mars , 2 days ago
-
RE: ASHP Install from hell - help please
@saf1973 I’ve been going through old cases on the forum...
By Mars , 2 days ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@aaron There's the rub, the database does not list my ...
By AF1 , 3 days ago
-
RE: Commencing on an ASHP Installation Process
Yes, it's "doable" if everything goes to plan, they arr...
By Old_Scientist , 4 days ago
-
RE: How not to install a heat pump
You are right. Thinking on this has evolved over the p...
By JamesPa , 5 days ago
-
RE: DHW SET UP with Samsung gen 5
Thats good news indeed, you are very likely almost ther...
By JamesPa , 5 days ago
-
RE: Plate heat exchanger considerations
As far as I can tell my vented system would have a peak...
By Scalextrix , 5 days ago
-
RE: Air Changes per Hour - ACH and the MCS requirement
There have been a few discussions dotted around (e.g. I...
By Declan90 , 5 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having made some enquiries locally I have found a compa...
By Morgan , 5 days ago